Moving Sale - Oldsmobile Parts for sale
June 30th, 2017, 12:29 PM
#1
Registered User
Thread Starter
Join Date: Jun 2017
Location: Spring, TX.
Posts: 1
Moving Sale - Oldsmobile Parts for sale
Moving sale. Located in Spring, Texas 77379 (NW of Houston).
Haven't been on here in about seven years. Moving this Saturday, everything listed must go.
I need all these Oldsmobile parts gone before July 8th. I do not have time to pack and ship. You will have to pick up in person or have a friend pick up in person. I will be more than happy to help load the parts.
1970 Cutlass SX/442 Rear Bumper in nice driver condition or re-chrome it. This bumper is not bent up or corroded. $250
1970 Cutlass Driver and Passenger front fenders. Original 1970 fenders with flat edge where hood meets at top of fender. $175 for the blue passenger fender $150 for the red/sebring yellow driver's fender. SOLD
Set of five 1970-72 SSII 14 X 7 wheels with four bolt on center caps. Wheels are very clean with no pitting. No trim rings. $250 SOLD
1971-1972 Oldsmobile 455 bare block F8 casting with main caps and water pump plate. Bore size measures 4.147-4.152 not quite .030 over since standard bore is 4.126 . $100 SOLD
1968 - 1969 Oldsmobile 455 Short Block on engine stand. Early F1 Casting. Bore size measures 4.141-4.145 not quite .030 over since standard bore is 4.126. Has crank, pistons, connecting rods, oil pump & pan, and water pump. Engine last ran in a 1969 Cutlass drag car in 2004. $300
1970 Cutlass/442 rear axle housing coded TM for 3.42 gear ratio. Has axles and brakes no gears. Behind 455 on stand. $100
1970 Cutlass center console Gold missing bottom half $50 SOLD
1969 Cutlass floor shift steering column. $100
Thanks,
Nick
Haven't been on here in about seven years. Moving this Saturday, everything listed must go.
I need all these Oldsmobile parts gone before July 8th. I do not have time to pack and ship. You will have to pick up in person or have a friend pick up in person. I will be more than happy to help load the parts.
1970 Cutlass SX/442 Rear Bumper in nice driver condition or re-chrome it. This bumper is not bent up or corroded. $250
1970 Cutlass Driver and Passenger front fenders. Original 1970 fenders with flat edge where hood meets at top of fender. $175 for the blue passenger fender $150 for the red/sebring yellow driver's fender. SOLD
Set of five 1970-72 SSII 14 X 7 wheels with four bolt on center caps. Wheels are very clean with no pitting. No trim rings. $250 SOLD
1971-1972 Oldsmobile 455 bare block F8 casting with main caps and water pump plate. Bore size measures 4.147-4.152 not quite .030 over since standard bore is 4.126 . $100 SOLD
1968 - 1969 Oldsmobile 455 Short Block on engine stand. Early F1 Casting. Bore size measures 4.141-4.145 not quite .030 over since standard bore is 4.126. Has crank, pistons, connecting rods, oil pump & pan, and water pump. Engine last ran in a 1969 Cutlass drag car in 2004. $300
1970 Cutlass/442 rear axle housing coded TM for 3.42 gear ratio. Has axles and brakes no gears. Behind 455 on stand. $100
1970 Cutlass center console Gold missing bottom half $50 SOLD
1969 Cutlass floor shift steering column. $100
Thanks,
Nick
Last edited by FourFifty-Five; July 21st, 2017 at 10:14 AM. Reason: Update
July 2nd, 2017, 04:49 PM
#5
1971 442 conv
Join Date: Jun 2009
Location: Austin, Texas
Posts: 665
How much for the whole entire lot delivered?
Moving sale. Located in Spring, Texas 77379 (NW of Houston).
Haven't been on here in about seven years. Moving next weekend, everything listed must go.
I need all these Oldsmobile parts gone before July 8th. I do not have time to pack and ship. You will have to pick up in person or have a friend pick up in person. I will be more than happy to help load the parts.
1970 Cutlass SX/442 Rear Bumper in nice driver condition or re-chrome it. This bumper is not bent up or corroded. $250
1970 Cutlass Driver and Passenger front fenders. Original 1970 fenders with flat edge where hood meets at top of fender. $175 for the blue passenger fender $150 for the red/sebring yellow driver's fender.
Set of five 1970-72 SSII 14 X 7 wheels with four bolt on center caps. Wheels are very clean with no pitting. No trim rings. $250
1971-1972 Oldsmobile 455 bare block F8 casting with main caps and water pump plate. Bore size measures 4.147-4.152 not quite .030 over since standard bore is 4.126 . $100
1968 - 1969 Oldsmobile 455 Short Block on engine stand. Early F1 Casting. Bore size measures 4.141-4.145 not quite .030 over since standard bore is 4.126. Has crank, pistons, connecting rods, oil pump & pan, and water pump. Engine last ran in a 1969 Cutlass drag car in 2004. $300
1970 Cutlass/442 rear axle housing coded TM for 3.42 gear ratio. Has axles and brakes no gears. Behind 455 on stand. $100
1970 Cutlass center console Gold missing bottom half $50
1969 Cutlass floor shift steering column. $100
Thanks,
Nick
Haven't been on here in about seven years. Moving next weekend, everything listed must go.
I need all these Oldsmobile parts gone before July 8th. I do not have time to pack and ship. You will have to pick up in person or have a friend pick up in person. I will be more than happy to help load the parts.
1970 Cutlass SX/442 Rear Bumper in nice driver condition or re-chrome it. This bumper is not bent up or corroded. $250
1970 Cutlass Driver and Passenger front fenders. Original 1970 fenders with flat edge where hood meets at top of fender. $175 for the blue passenger fender $150 for the red/sebring yellow driver's fender.
Set of five 1970-72 SSII 14 X 7 wheels with four bolt on center caps. Wheels are very clean with no pitting. No trim rings. $250
1971-1972 Oldsmobile 455 bare block F8 casting with main caps and water pump plate. Bore size measures 4.147-4.152 not quite .030 over since standard bore is 4.126 . $100
1968 - 1969 Oldsmobile 455 Short Block on engine stand. Early F1 Casting. Bore size measures 4.141-4.145 not quite .030 over since standard bore is 4.126. Has crank, pistons, connecting rods, oil pump & pan, and water pump. Engine last ran in a 1969 Cutlass drag car in 2004. $300
1970 Cutlass/442 rear axle housing coded TM for 3.42 gear ratio. Has axles and brakes no gears. Behind 455 on stand. $100
1970 Cutlass center console Gold missing bottom half $50
1969 Cutlass floor shift steering column. $100
Thanks,
Nick
July 21st, 2017, 08:58 AM
#8
slsbarker
Join Date: Jul 2017
Location: Central Texas
Posts: 1
"1971-1972 Oldsmobile 455 bare block F8 casting with main caps and water pump plate. Bore size measures 4.147-4.152 not quite .030 over since standard bore is 4.126 . $100"
Just started looking & hoping maybe you still have the 455 block?
Just started looking & hoping maybe you still have the 455 block?
Thread
Thread Starter
Forum
Replies
Last Post
j_link
Parts For Sale
7
August 11th, 2013 07:49 AM
