Built 403 for sale
December 3rd, 2016, 06:35 PM
#1
Registered User
Thread Starter
Join Date: Nov 2016
Posts: 12
Built 403 for sale
For Sale-Tampa/st pete Florida
OLDSMOBILE 403
Built by Mark Remnel- Cutlassefi(here on classicoldsmobile.com check him out) Look under 403 Cutlassefi post in the small block section. He will answer any questions about this.
.039 over 403, KB 6cc piston, .020 in the hole
N crank
4 main halo
Stock rods
455 C heads, 2.07/1.68 Built by Champion Racing Heads
221/228@.050 on a 112, in at 107 Custom Lunati Hyd Roller
5/16 one piece restricted pushrods
HS 1.6 rockers
9.0:1
QF 750 Slayer
Performer RPM intake matched to the heads
Accel HEI 30* Timing
Melling HV pump with purple spring
451hp@5600/512tq@3600. Run on 91 octane pump gas.
$5000 727-643-3385
OLDSMOBILE 403
Built by Mark Remnel- Cutlassefi(here on classicoldsmobile.com check him out) Look under 403 Cutlassefi post in the small block section. He will answer any questions about this.
.039 over 403, KB 6cc piston, .020 in the hole
N crank
4 main halo
Stock rods
455 C heads, 2.07/1.68 Built by Champion Racing Heads
221/228@.050 on a 112, in at 107 Custom Lunati Hyd Roller
5/16 one piece restricted pushrods
HS 1.6 rockers
9.0:1
QF 750 Slayer
Performer RPM intake matched to the heads
Accel HEI 30* Timing
Melling HV pump with purple spring
451hp@5600/512tq@3600. Run on 91 octane pump gas.
$5000 727-643-3385
Last edited by Pete403; December 27th, 2016 at 05:26 PM.
January 9th, 2017, 07:10 PM
#3
Registered User
Thread Starter
Join Date: Nov 2016
Posts: 12
From Cutlassefi
..039 over KB 6cc pistons
350 N crank
Hastings Performance Moly rings
ACL Main brgs
Clevite Rod brgs
Durabond cam brgs
Cloyes billet timing set
Lunati hyd roller 221/228@.050, 112 lobe sep, ,542/.536 Lift
Harland Sharp 1.6 rockers
Performer RPM intake, port matched
QF 750 Slayer carb
Align honed with 4 main Halo
ARP Bolts
Square decked
Honed to .039 over
Balanced
Reconditioned stock 350 rods
C heads, 2.07/1.68 valves, minor bowl work
..039 over KB 6cc pistons
350 N crank
Hastings Performance Moly rings
ACL Main brgs
Clevite Rod brgs
Durabond cam brgs
Cloyes billet timing set
Lunati hyd roller 221/228@.050, 112 lobe sep, ,542/.536 Lift
Harland Sharp 1.6 rockers
Performer RPM intake, port matched
QF 750 Slayer carb
Align honed with 4 main Halo
ARP Bolts
Square decked
Honed to .039 over
Balanced
Reconditioned stock 350 rods
C heads, 2.07/1.68 valves, minor bowl work
Last edited by Pete403; January 9th, 2017 at 07:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
88hurstolds
Parts For Sale
4
January 20th, 2020 11:39 AM
