Have some misc items

71-72 front bumper brackets, blasted and painted black. These are just the brackets which bolt to the frame. $30/pair

71-72 LH front turn signal lens. real nice driver shape, one light scratch. Even have the 3 mounting screws. $10

64-69 vacuum trunk opening tank. Just the round tank that goes in the trunk. $15

68-72 convertible interior header metal pieces which the sunvisors go through. $30/pair

71-72 (and others) cast iron thermostat housing. $8

67 horn button, $10

67 supreme dash emblem $10

69-72 steering column cover at dash. gold in color but can be painted $5

68-69 trunk light $15

64-72 convertible rear interior light bezel, $15

have some 14x7 bolt on center cap SSII/III rims. driver shape. probably no trim rings but if I do they are dented. I do have the wheel opening bezels. center caps are driver shape also. $25/rim

70-72 convertible/4dr trunk lid. from a 71 4dr. rust free from OKC. $250

70-72 driver fender, professional repaired. from a 71 or 72. I'd use it myself but my 70 already has a near perfect driver fender. trade for same condition passenger fender or sell for $300

66/67 driver vent window frame, no glass. $30

64-72 convertible top motors, have 2. $30 each

69 dash plastic, black. has a couple small holes drilled in it that would be covered if you installed the optional woodgrain. $30

have a pair of 70 Cutlass S/F-85 NOS grills. $900

72 350 4bbl intake, $10

71-72 brake combo valve with mounting bracket which bolts to the frame, $50

67 back up lens, $5

68 back up lens, $10

69 back up lens, $10

74 back up lens, $10

65-66 fuel door bumpers, $3/pair

70 "Cutlass" fender script, $10

72 "Cutlass" fender script, $5

66/67 quarter window chrome moldings, have 3, $10/each

NOS 4sp stuff (and 3sp too), the clip and seats for the ball stud at the frame bracket of the z-bar. $8 for enough to rebuild one z-bar

have a bunch of other misc items too, nothing rare. If looking for something specific just ask, I may have it

shipping is extra

 

68/69 vinyl top chrome set - sold

 

I am looking for a Big Block Power steering Pump and Brackets and a Power Steering Gear for a 1965 442.

Anything?

Geezer in CT

 

I am looking for the tailight lense and bezel (there are 4) for a 1970 Cutless Supreme. It is the one with the silver trim on the lense itself. If it's not a Supreme, the lense is solid red. I only need one. Anybody??

 

don't have any pre-68 p/s setups. sorry

I know I sold a complete set of 70 supreme lenses a while back. I'll have to check if I have any singles laying around

 

Might you have a 1966 Cutlass fuel tank? Thank you.

 

sorry, don't have a 66 fuel tank

 

also have some 14x7 bolt on center cap SSII/III rims. driver shape. probably no trim rings but if I do they are dented. I do have the wheel opening bezels. center caps are driver shape also. $25/rim

70-72 convertible/4dr trunk lid. from a 71 4dr. rust free from OKC. $250

70-72 driver fender, professional repaired. from a 71 or 72. I'd use it myself but my 70 already has a near perfect driver fender. trade for same condition passenger fender or sell for $300

 

hI Looking for rear door panels for 72 Cutlass convertible , just need the metal core and weather strip

 

sorry, the ones I had I sold a while ago. I don't have any more at this time

 

i need 2 wheels for my '64 starfire. thanks, Mike

 

starfire wheels? no idea what bolt pattern starfire is, but if they are 4 3/4" bolt pattern, then the A-body wheels I have will fit

 

a few more things

66/67 driver vent window frame, no glass. $30

64-72 convertible top motors, have 2. $30 each

69 dash plastic, black. has a couple small holes drilled in it that would be covered if you installed the optional woodgrain. $30

 

have a pair of 70 Cutlass S/F-85 NOS grills. $900

72 350 4bbl intake, $10

NOS 4sp stuff (and 3sp too), the clip and seats for the ball stud at the frame bracket of the z-bar. $8 for enough to rebuild one z-bar

 

some of this would look better under your tree for xmas or on your car as opposed to in my storage garage

 

Looking for parts for a 69 Cutlass. Might you have a pair of backup light assemblies, with wiring back to the connector?

 

1972 442 - looking for a front license plate bracket, trunk light, map light, or courtesy lights.

 

I think I do, just need to find the box it's in. unless it's just the lenses I have.

 

no front license bracket.
sold the 70-72 trunk light. don't believe I have any more
no map light
courtesy light? the blue lenses in the dash? courtesy lights in the rear armrest assemblies on a convertible?

 

That would be great. I have the lenses, but looking for the fixtures with the rubber grommet and wire connectors.

 

71-72 brake combo valve with mounting bracket which bolts to the frame, $50

 

have only found one so far. will keep looking

 

I only have located the one. includes the mounting bracket. The wire connecter isn't there, but there is enough wire to crimp on a metal connector. The plastic connection is missing too but those are easy to locate.

 

pics of some items

100_2834.jpg

100_2833.jpg

100_2832.jpg

 

Do you still have these parts?

64-69 vacuum trunk opening tank. Just the round tank that goes in the trunk. $15
68-69 trunk light $15

Does the vacuum tank have any other parts, like hoses, with it?

Does the trunk light have the wiring harness attached? Is it mercury switch activated?

By any chance to you have the vertical window chrome trim for a '68 post coupe?

Thanks,

 

yep. have both. I just have the round tank that goes in the trunk. The trunk light does have the wire harness. It's the factory trunk light. I never looked at it further to see if it's mercury switch activated.

The post coupe trim on the b pillar?

 

Looking for the under the dash courtesy lights that come on when the doors open.

 

I believe it is the B pillar. Here is a picture of the missing piece.
https://classicoldsmobile.com/forums...9&d=1253922008

Can you post a picture of both items please? I wonder what all the other components are that I need to reinstall the missing vacuum trunk opener on my '68?

Thanks!

 

I gotcha. No I don't have those

 

Looks like the b pillar is the piece you have. You are missing the piece on the door frame (the pieces on the door are a MAJOR PITA to remove btw)


from what I can recall, you'll need the button in the glove box. a very long vacuum hose. and there is a longer lock rod for the trunk lock.

I'll work on pics for ya

 

I just purchased a trunk light assembly, but I am still interested in the vacuum tank and the chrome trim door piece if you have one.

Also, if you happen to have them, (you said ask! ) I need:

1968 passanger side hood hinge with the wide spaced bolt holes for the fender (I have a mis-matched set)

1968 hood light and wiring harness

1968 center console door

1968 center console 3 speed automatic floor shifter

1968 bumper jack and lug wrench along with the mounting bracket, jack bracket, and tire hold down nut & J bolt.

Thanks!

 

yes I did say just ask, because what I've posted is maybe 1% of what I have for sale.

no 68 hood hinges, console stuff or floor shifter. don't have the bumper jack setup or lugwrench. If by mounting bracket you mean the hoop welded to the trunk floor. I do have that from a parts car. I'd have to cut that out of the trunk floor. I don't have the tire hold down nut and I may have sold the j bolt. I'd have to check. I'd have to check on the hood light and wire harness also. I think I have one with the wire and connectors, but it has lots of surface rust. easy to get it replated though, but I'll try and locate that also.

 

need for a '70 442 ; hood hinges, padded dash, sun visors black, used factory hose clamps with patina, original rugs, seat belts black, the plastic dealie(stone shield /) that the front bumper always hits. I am looking for "Daily Driver" stuff good to cherry.

 

pics of the 69 dash plastic

100_1892.jpg

100_1894.jpg

 

Here's the vacuum trunk release tank

100_2835.jpg

 

have some 66/67 qtr window chrome moldings. driver shape. two of them have some small pits on the inside. $10/each

100_2836.jpg

 

have several sets of 69-72 hood hinges
have a 70-72 dash pad core
not sure about sun visors. I have some but not sure they are black, will have to check
I think I may have some factory hose clamps, will have to check
no carpets, well, that are worth anything.
no black seat belts
70 doesn't have the front stone shield like 71-72. The headlight housings and grills are what the bumper hits. well, along with the fender depending on how the bumper is adjusted.

 

Do you have the glove box button as well? Have you tested it?

 

what I have for the vacuum trunk release is just the tank in the trunk like shown in the picture. I have nothing else for the vacuum trunk release

 

do you still have the convertible top motors still? can you send me some pix of them? also, I need a steering wheel and the horn guts to a 1964 F85. thanks.
enorth10@hotmail.com