When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
An Upgraded aftermarket Oldsmobile HEI distributor and a ton of spare parts/pieces
SOLD
Included in this sale are:
1. Good working HEI distributor with brand new USA made gear, has OEM/ Delco USA made guts installed, a good AC Delco Coil installed in the cap, brass rotor tip and Brass tipped cap. Also has Accel performance HEI module installed. Made a dyno proven 474 hp on the first go around of our engine testing. The Accel module made more power and pulled cleaner up top for sure over the stock old GM HEI module that was installed originally (we threw that one away). Bottom of distributor was ground/clearanced for an uncommon intake manifold clearance. You won't be able to see the marks when the distributor is installed.
2. 3 spare USA made coils - 2 AC DELCO, 1 Standard ignition
3. 2 spare complete modules and connector systems(1 Napa and one AC delco) aand 1 extra AC Delco module - white)
4. 1 spare GM factory cap, two coil covers
5. Lots of rubber insulators and coil power transfer buttons and spare screws for coil mounting into cap.
6. Two spare HEI housings that have been ground on under the bottom area
7. Brand new HEI distributor gear
Trying to get this stuff sold to help fund our car project......
SOLD!!!
Last edited by Battenrunner; March 25th, 2020 at 08:57 PM.
Yes Sir, learned that myself twice!!! Even good modules go out, and a spare is only a 5 minute swap to get you going again....
I found a bunch more vacuum advance cans that Dad has modified or tuned to give specific amounts of vacuum advance as well.... these will also be included!
March 23rd, 2020, 09:08 PM
