Tons of 1972 Cutlass/442 Parts for Sale in Bulk
#1
Tons of 1972 Cutlass/442 Parts for Sale in Bulk
Hello Everyone,
As some of you know I have been doing a pretty heavy restoration to my 1972 Cutlass S with a bunch of suspension, interior and engine modifications. I've collected parts over the years and won't be reusing some of the items from the car so I'd prefer to sell all of this in bulk. I am located in Lincoln, Nebraska and would consider somewhat local deliver depending on price.
Engine (all stock 350 parts - car had 135k original miles and sat for about 7 years towards the end.)
-Stock Intake with Rochester 2brl
-7A heads and valve covers
-Oil Pan
-Turbo 350 (Worked well but leaked quite a bit)
-Flywheel (Turbo 350)
-Stock Radiator
-Stock Pulleys
-Full Stock AC system (only items not included are the dash vents and the system needs rebuilt)
-Windshield washer resivor
Suspension, Brakes and Wheels:
-Entire Front end set up including upper/lower control arms, spindles and front sway bar (also have an extra sway bar from a '69 I believe)
-4 wheel drum brake set up
-Rear control arms/bars
-4 SSII Wheels with tires with beauty rings and bolt in caps
-Stock steering box
Body:
-1 Driver Side Fender
-2 Passenger Side Fenders
-All original glass (can include windshield as well but has a small hairline crack in corner)
-Front Plastic wheel wells (original so they are a little rough)
Interior:
-All seat belts
-Aftermarket Ecliplse AntiShock CD Player (with lower under dash mount/enclosure) and Rockford Fosgate 6x9s
I think a fair cash price for everything is $2,250 but please make sure to tell me if I am out of line or not asking enough in your opinion. I'm just trying to be fair.
I also will have a brand new 'long' water pump $100 (Summit # BRA 1775) for sale that was used to test fire the motor (needed a short for my pulley set up) and a set of 17in American Racing Torq Thrusts for sale separately ($1,000) with tires.
Please call if interested at 402-369-0499 - Ben
As some of you know I have been doing a pretty heavy restoration to my 1972 Cutlass S with a bunch of suspension, interior and engine modifications. I've collected parts over the years and won't be reusing some of the items from the car so I'd prefer to sell all of this in bulk. I am located in Lincoln, Nebraska and would consider somewhat local deliver depending on price.
Engine (all stock 350 parts - car had 135k original miles and sat for about 7 years towards the end.)
-Stock Intake with Rochester 2brl
-7A heads and valve covers
-Oil Pan
-Turbo 350 (Worked well but leaked quite a bit)
-Flywheel (Turbo 350)
-Stock Radiator
-Stock Pulleys
-Full Stock AC system (only items not included are the dash vents and the system needs rebuilt)
-Windshield washer resivor
Suspension, Brakes and Wheels:
-Entire Front end set up including upper/lower control arms, spindles and front sway bar (also have an extra sway bar from a '69 I believe)
-4 wheel drum brake set up
-Rear control arms/bars
-4 SSII Wheels with tires with beauty rings and bolt in caps
-Stock steering box
Body:
-1 Driver Side Fender
-2 Passenger Side Fenders
-All original glass (can include windshield as well but has a small hairline crack in corner)
-Front Plastic wheel wells (original so they are a little rough)
Interior:
-All seat belts
-Aftermarket Ecliplse AntiShock CD Player (with lower under dash mount/enclosure) and Rockford Fosgate 6x9s
I think a fair cash price for everything is $2,250 but please make sure to tell me if I am out of line or not asking enough in your opinion. I'm just trying to be fair.
I also will have a brand new 'long' water pump $100 (Summit # BRA 1775) for sale that was used to test fire the motor (needed a short for my pulley set up) and a set of 17in American Racing Torq Thrusts for sale separately ($1,000) with tires.
Please call if interested at 402-369-0499 - Ben
Thread
Thread Starter
Forum
Replies
Last Post
Demond's Muscle Car
Electrical
33
November 30th, 2014 05:17 PM