When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need to raise some cash to fund my project, I kinda stalled out over the winter but ready to get back to it, just need some $$$. So, I have for sale some pulleys that I will sell in pairs or individually. They have been bead blasted and primed with etching primer. The 3-groove pulleys are very clean, the 2-groove crank pulley was a bit rusty on the inside (just look at the pics).
Here's what I have:
'69 Waterpump pulley #399401-KE, 2-groove fits pwr steering, no AC SOLD '69 Crank pulley #399402-KB, 2-groove, fits pwr steering, no AC SOLD '69-'70 Waterpump pulley #399404-KF, 3-groove, fits pwr steering w/AC SOLD: '72 Crank pulley probably #409806-KB, 3-groove, fits pwr steering w/AC
Will sell them individually $50 ea. or $90 for a set of 2 pulleys (crank+waterpump). Shipping is not included. Cash, money order, or PayPal friends & family. Here's some more pics:
Last edited by cdrod; November 22nd, 2017 at 07:39 AM.
Reason: Update availability
I need to raise some cash to fund my project, I kinda stalled out over the winter but ready to get back to it, just need some $$$. So, I have for sale some pulleys that I will sell in pairs or individually. They have been bead blasted and primed with etching primer. The 3-groove pulleys are very clean, the 2-groove crank pulley was a bit rusty on the inside (just look at the pics).
Here's what I have:
'69 Waterpump pulley #399401-KE, 2-groove fits pwr steering, no AC
'69 Crank pulley #399402-KB, 2-groove, fits pwr steering, no AC
'69-'70 Waterpump pulley #399404-KF, 3-groove, fits pwr steering w/AC
'69-'71 Crank pulley no part number, 3-groove, fits pwr steering w/AC
Will sell them individually $50 ea. or $90 for a set of 2 pulleys (crank+waterpump). Shipping is not included. Cash, money order, or PayPal friends & family. Here's some more pics:
could you send me horizontal pictures of the balancer pulleys? I need the one that's almost flush with the balancer when bolted up
Andy:
Here are a few side shots. The belt grooves on both pulleys line-up the same; the first groove is 1-1/16" from the balancer side of the pulley. The overall heights are different (2-groove vs. 3-groove). The 2-groove pulley is 2-3/16" the 3-groove pulley is 2-15/16". HTH.
Rodney
Last edited by cdrod; April 20th, 2017 at 04:08 PM.
Reason: spelling
Andy:
Here are a few side shots. The belt grooves on both pulleys line-up the same; the first groove is 1-1/16" from the balancer side of the pulley. The overall heights are different (2-groove vs. 3-groove). The 2-groove pulley is 2-3/16" the 3-groove pulley is 2-15/16". HTH.
Rodney
shoot! Not the right setup for my rig. Thanks for the pictures though!
The thing about the Olds pulleys is its hard to mix and match so its easiest to stay w a complete set if you look at the two letter code on the pulleys you have it may be easier to line up w what you need
Andy:
According to the ASM, '69, '70, & '71 crank pulleys for AC cars are the same; 399405-KC. '69 & '70 water pump pulley is 399404-KF. I have both of these, but you should check your water pump length to make sure the 399404-KF will work with your water pump.
ROdney
The pulley Andy is looking for that mounts to the balancer is '67 and older. They are the only ones that mount flush. '68 and up use the ones in the pics.
The longer shaft water pumps are AC and W30 applications. If you don't have AC and are using the longer shaft water pump you need the "KM" pulley for the water pump. In 1971-72 the longer shaft water pump casting number is 408329 and 407586 for AC. The standard length water pump casting number in 1971-72 is 408328.
442JP:
Upon further inspection, the 3-groove crank pulley I have doesn't have a PN stamped on it. So I compared it to some other pulleys I have for a '72 350, AC motor and the diameter is too big to work with the 399404-KF water pump pulley, so these 2 are not a matched set. The 3-groove crank pulley must be a 409806-KB for '72 cars (matches one I have in the garage). Here's what I have for 3-groove pulleys:
April 18th, 2017 | 09:51 PM
