Post sCrane "Stocker Style " Blueprint Hydraulic Cam
#1
Post sCrane "Stocker Style " Blueprint Hydraulic Cam
Hydraulic Cam (Stocker Grind). Suitable for track only-too much duration (244) at .050 for normal street usage-will cause over-rich carb condition at regular operation. Crane Cam had bought the old Lunati design. This is a 296 degree advertised duration, .474 lift (with 1.6 rockers). Will send copies of cam card from Crane. Similar to the old Lunati RL 328 cam we used to use in the stock eliminator cars. Spent $210 at Crane to get this ground. Comes with full set of lifters already run in with this cam, organized by correct # tappet to re-install. $260 invested-make me an offer. Ron 703 509 0762
#3
Stocker Cam
Yes, very much like the old Avionics 328 but holds intake valve open so long that it is almost impossible to lean down a Q Jet to get it to have a mixture that is not too rich. I can send anybody the cam card. It works fine when you are at the track and have the RPM s up but for in an out of the trailer for a show car, it was way too much duration
Thread
Thread Starter
Forum
Replies
Last Post
81 regency
Parts For Sale
0
April 21st, 2011 06:18 PM