PARTING OUT A MOSTLY RUST FREE 66 CUTLASS 442 2 DOOR POST THIS IS AN AC CAR VERY STRAIGHT BODY PARTS, ALSO HAVE FOUR OTHER 66 PARTS CARS AND A 67 AS WELL AS YEARS OF PARTS, NO 4 SPEED PARTS, NO CONSOLES OR RAM AIR OR TRI POWER PARTS, NO E BLOCK 400'S LEFT RIGHT NOW. EMAIL WHAT YOU ARE LOOKING FOR AND I WILL CHECK STOCK AND GET YOU PRICES BE SURE TO EMAIL YOUR NEEDS TO lemoldsnut@aol.com with your location and needs for a price quote.

HAVE POST DOORS, HARDTOP DOORS, FENDERS, A CUTLASS BUT NOT A 442 HOOD, CORE BUMPERS, GOOD TRANS, GOOD REARENDS, SOME INTERIOR TRIM, AC PARTS, TRIM, NO 66 442 TRUNK TRIM LEFT, SUSPENSION PARTS, HEADER TYPE DUAL EXHAUST WITH FLOWMASTERS, GLASS, ST300 TRANSMISSIONS ROAD TESTED, DRIVE LINES, AND ON AND ON. REBUILDABLE 455, RUNNING 350 425 WITH TONS OF EXTRAS, CUTLASS TAILLIGHTS, GOOD FLOORS, SEVERAL SETS OF HEADS, B, C, G, K, J

email lemoldsnut@aol.com

 

There was a guy local to me looking fir the doors would you like his info or should i pass yours on ?

 

Yes that would be great. I just shipped a hood, doors and a gas tank to Florida and it was very reasonable using Fastenal. So, Utah would be also. Thanks
Larry

 

I sent him a text if the info he placed a wanted add here on ksl so hopefully he will contact you. It was a few months ago so he might have figured it out

 

Go you know if the ac lines and compressors are the same as 65 ?

 

I have a new phone number if you ahve questions 541-815-4363
Email 541-815-4363

 

I'm in need of 67 front fenders. For a supreme but will take any nice ones.

 

I do have a nice pair of 66-67 fenders,
a nice rust free 66 cutlass hood,
a nice rust free 67 442 hood that is not cheap (I am not in a hurry to sell it)
I have a nice set of straight rust free 66-67 post doors,
a couple of good 66 core supports
Quarter panels,
firewalls,
ac parts
heater parts
67 auto console
67 column floor shift column
Some 66 and some 67 trim email or call for more info
good 66 dash insert
power brake set up
power steering gears
suspension parts
350 olds nice running
67 425 toronado engine complete
th400 core trannies
good st300 trannies
good toronado trannies
67 floor shift auto console with shifter
67 floor shift column
66-67 trunk lids
many body parts
lots of glass tinted and clear


3:23 one posi and one open rearends


all located in Redmond Oregon
lemoldsnut@aol.com
or call west coast time 8 am to 8 pm 541-815-4363

 

Do you have any Fischer seat belts for the front bench seat? I am looking for gold ones for my '67 442. I only have 1 retractor and have no clue where the other front belts went. They just disappeared.

 

I have a 67 post car. Looking for the drivers front vent window. Also need the ignition switch w/key, door and trunk locks. Perfer they all come from same car. May need more as I start this project. Thanks

 

No on a set of locks with keys.
I have a set of post doors that I am selling as full doors. Do you need just the glass or do you need the entire vent window assembly?

Best to email me direct at lemoldsnut@aol.com

Thanks
Larry

 

hi do u have a center dashboard a/c vent for a '66 or '67 cutlass?...thanks

 

Still have that set of 66 post doors available?

 

Do you have any interior pieces? I'm working on a 67 post.

 

Email sent

Kelly

 

For a "64" cutlass, do you have wire wheel covers or a 2-spoke center hub? Also looking for rocker panel trim and extension pieces, right front fender trim. Thanks!

 

I have been asked a few times about 64 and 65 parts. I have nothing for those that are year specific. If it is an item that fits a few years than I might have it. 66-72 has been my primary years of cars I have had and parted or sold. you can email direct to lemoldsnut@aol.com

 

Speaking of '66 Cutlass parts for sale...
Do you have..???
-The drivers side, rear fender trim. The last piece to the right...
-Do you have the trunk lip trim, in good condition
-Grill and trunk emblems that aren't too faded out
I will need to make a list, I am sure there are many other things...

Thanks,

Larry

 

Should be yes to all the above. You are talking about a 66 Cutlass right?

Email me direct at lemoldsnut@aol.com

Thanks
Larry

 

Just in a fresh 66 Cutlass 2 door hardtop, factory power steering, power brakes, bench seat, column auto, air conditioning car.

email me your needs from this or the other 8 I am currently parting out.

Thanks
Larry
lemoldsnut@aol.com
calls west coast time 8 am to 8 pm only please 541-815-4363

 

3.23 posi rear end. That's an "O" axle right? I'm interested in the whole unit.

 

Hi I am also interested in he posi rear if it is a type "o" rear.

 

The rearend is a 10 bolt I believe it would be refered to as a "P" type.

Also have two nice 66 dash inserts. not lighter melted not radio modified and not cracked up.

Lots of other parts. email direct is best at lemoldsnut@aol.com

or calls between 8 am and 8 pm west coast time 541-815-4363

Thanks
Larry

 

Hey Larry are the dash inserts the same as a 67? If so can u send me a picture? My email is tallpaul@optonline.net

Thanks
Paul

 

66 and 67 are different. The difference is the wiper switch hole. A 66 has a shallower hole than a 67. I used a 66 in one of my 67's with the 67 switch and a couple of washers on it and you can not tell.

 

Larry:
Do you have a pair of rear window regulators for a 66 Cutlass 2 door sedan that operate smoothly, don't need the glass though.
Thanks Ron

 

Yes I do will send a private message.

Thanks
Larry

 

How much for the 66 cores?
Ron

 

Have a near perfect 66 Cutlass Hood

 

Due in a 66 Cutlass 2 door hardtop 330 floor shift auto car. (shifter bad) good straight not rotten car. Will be parting out.

 

66 core support
67 core support
66-67 fenders
67 bucket seats
66 2 door back seat
66-67 exterior trim (email for needs)
lots of suspension parts
a few nice 66 dash inserts
66 auto console
soon coming a 64-69 4 speed console
66-67 4 speed air cleaner
66 auto air cleaner
radiator hold down plates
hardtop and post doors
deck lids
66 bumpers (no rechrome or show quality)
67 bumpers (no rechrome or show quality)
330 core engine parts
66 frame 2 door
66-67 rust free trunk weather strip rear section
66-67 rear quarter panels
66 door panels for the trim (hardtop)
66-67 AC parts
66 very nice Cutlass hood
67 Cutlass hood with lots of louvers (custom not a 442 hood)




email or call for needs

best to email direct at lemoldsnut@aol.com
-
calls west coast time 8 am to 8 pm -

 

Hi, I'm looking for 67 a/c outlets and bezels, sides and center, with plastic ducts.
I believe 66 is the same. Thanks! Manny

 

Hi, looking for a 64-66 steering column complete, steering wheel not needed. Column shift or floor shift, if you have anything please PM me a price shipped to NY zip 12538 and pics if possible. Thanks!

 

Just to update, currently parting out 2 66 442/cutlass cars and 7 67 442/Cutlass cars. At this time no 4 speed consoles and no ram air or w-30 specific parts. lots of sheetmetal, trim running gear several engines and other parts. always best to email direct at lemoldsnut@aol.com it is very dificult to reply to emails from this sight using a dumb/smart phone. But very easy and quick if you email direct to me.
or calls 8 am to 8 pm west -coast time at 541-815-4363

I also have several 67 Olds cars for sale.

Thanks
Larry