Parts For Sale Please read forum guidelines before posting.

Parting out a 1970 Toronado

Thread Tools
 
Search this Thread
 
Old Jan 4, 2012 | 05:26 PM
  #1  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Parting out a 1970 Toronado

All original car. Lots of good parts. I just got it today so i figure i would pick parts for people the first day or so. It has a nice black interior i hope someone can use (other then a rip on the driver seat) Ill hook up a battery to see what electrical works. It has been sitting since 1982 in an old guys garage so i hope the mice didnt get to it to bad.


The first pic is just a tease. It really doesnt look that nice.

:lol:











Old Jan 4, 2012 | 07:26 PM
  #2  
charlierogers's Avatar
Registered User
 
Joined: Nov 2010
Posts: 560
From: illinois
if the distributer is the same as a 70 442 auto number wise i would be interested in that.
charlie,,,
Old Jan 4, 2012 | 08:46 PM
  #3  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
This was the one in Lombard?
Old Jan 4, 2012 | 10:03 PM
  #4  
RATCHETMASTER's Avatar
"I reckon so!"
 
Joined: Jan 2009
Posts: 371
From: The Mountain West
Josh
I sent you a pm on the other site. Please put me in line on the parts I requested pending prices.
Thanks
Tim
Old Jan 5, 2012 | 03:14 AM
  #5  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by J-(Chicago)
This was the one in Lombard?
Yep. I had to go get it before someone bought it for scrap. It was up on craigslist way to long. I was about to pull the trigger on the cheap Vert, and the 50 too.But they both sold.
Old Jan 5, 2012 | 03:14 AM
  #6  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by charlierogers
if the distributer is the same as a 70 442 auto number wise i would be interested in that.
charlie,,,
Im not sure, but i will check that for you.
Old Jan 5, 2012 | 03:15 AM
  #7  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by RATCHETMASTER
Josh
I sent you a pm on the other site. Please put me in line on the parts I requested pending prices.
Thanks
Tim
Tim

i just got back to you on ROP. Thanks
Old Jan 5, 2012 | 11:37 AM
  #8  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
Originally Posted by f-85
Yep. I had to go get it before someone bought it for scrap. It was up on craigslist way to long. I was about to pull the trigger on the cheap Vert, and the 50 too.But they both sold.
I was starting to worry about that one. Glad you snagged it up.

If all these guys would just ask 500 bucks for their junk cars in the first place, instead of 1500, and are too lazy to part it themselves.... we wouldn't have to chew up any fingernails worrying that they're going to get pissed and scrap all those good parts.

People want to be rewarded for letting their cars rot to death.
Old Jan 5, 2012 | 11:59 AM
  #9  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Yep your right. I always get them alot less then listed for. But it is usually as they sit online for a while. Then i can talk them down easier. If they would have listed the car for $500 a scrapper would have been there so fast. I think it makes it easier for them to sell it for less knowing its going to a good home, or at least it isnt going right to the junk yard.
Old Jan 5, 2012 | 12:18 PM
  #10  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
Originally Posted by f-85
Yep your right. I always get them alot less then listed for. But it is usually as they sit online for a while. Then i can talk them down easier. If they would have listed the car for $500 a scrapper would have been there so fast. I think it makes it easier for them to sell it for less knowing its going to a good home, or at least it isnt going right to the junk yard.
A lot of the scrappers wouldn't even bother at $500. Most of them are broke, and not car guys. A complete car only has 3000lbs in scrap metal after glass tires and interior.
So.....that leaves a COMPLETE car only worth about 400 and you still have Fuel cost, and 3 days of labor to do taking out parts and cutting it up into pieces.

Not a glorious task, but for us guys that love cars, it's a labor of love.
Old Jan 5, 2012 | 12:29 PM
  #11  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Not that kind of scrapper. The ones that junk cars. You see their adds on craigslist looking for junk cars. Your right though, Even those guys are not car guys. I have been selling the shells cheap to them. But they are never into the cars. Its just a easy job to them that they can be lazy and just get by. Kind of the The scrapper we both know from bolingbrook.
Old Jan 6, 2012 | 06:18 PM
  #12  
bluecab's Avatar
Mostly Gristle
 
Joined: Mar 2011
Posts: 409
From: Wickford, RI
Hi ,
Could you PM me a price for the dashboard?
Does this car have disk brakes?
Thanks.
Old Jan 6, 2012 | 11:39 PM
  #13  
J-(Chicago)'s Avatar
Seasoned beater pilot.
 
Joined: Jan 2007
Posts: 5,468
From: Chicago
I went and looked at the car today. It did have disc brakes.
Old Jan 12, 2012 | 05:02 AM
  #14  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
OK i got it all stripped down. Im gonna send pics to the ones that requested them. Hit me up before the stuff gos to ebay!
Old Jan 12, 2012 | 11:37 AM
  #15  
charlierogers's Avatar
Registered User
 
Joined: Nov 2010
Posts: 560
From: illinois
would still be interested in dist if its the same as 70 442! thanks charlie,,,
Old Jan 16, 2012 | 02:39 PM
  #16  
dedsleds's Avatar
Registered User
 
Joined: Jan 2009
Posts: 608
From: CHICAGO RIDGE, IL
ya this car was local to me but guy wanted too much at the time....i see on CL

what's your ebay handle?

Last edited by dedsleds; Jan 16, 2012 at 02:42 PM.
Old Jan 16, 2012 | 03:15 PM
  #17  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by charlierogers
would still be interested in dist if its the same as 70 442! thanks charlie,,,

Sorry Charlie Sold the whole complete engine and drive to a guy in Sweden. Putting it in the trunk of a corvair

If you have the number i can check all my others and see if i have the right one.
Old Jan 16, 2012 | 03:17 PM
  #18  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by dedsleds
ya this car was local to me but guy wanted too much at the time....i see on CL

what's your ebay handle?

Well without a title it was worth less no doubt.

Its oldspoweredeverything
Old Jan 25, 2012 | 08:45 PM
  #19  
oldsrocket88's Avatar
Registered User
 
Joined: Mar 2010
Posts: 410
From: IL..where the road salt kills..
I could use the hold down bracket/clamp for the jack assembly (looks like a L or J shaped flat piece of metal with a hole in one end) and hoping there is an extension piece on the bottom of the dash that would curve down into the drivers side floor mat just right of the gas pedal, center dash. Let me know if these are aval. Thanks
Old Jan 26, 2012 | 08:46 AM
  #20  
rocketraider's Avatar
Oldsdruid
 
Joined: Dec 2007
Posts: 10,637
From: Southside Vajenya
Josh, if it's a manual A/C car and no one has claimed it, I can use the A/C control head. I can't tell in the pic if it's A/C or heater only. Price and ride to 24520?

Here's some interchange:

Doors, roof and all body glass 1966-1970. Glass is also an interchange with 66-70 Riviera.

Hood 1968-1970

Decklid 1969-1970. All other sheetmetal is 1970 Toro only.

Front 7 rear stub frames 1966-1970

Rocket88, I think the trunk tools are identical 66-70. If the car has the styrofoam holder with cardboard sleeve for them, that is a good score.

If car still has the exhaust pipe shields where the pipe goes over the steering shaft, also a good score. They often got left off in exhaust work and you can tell a difference when it's missing.

There are also rubber flaps between the rear bumper and the trunk pan that are often gone or cut away to access taillight bulbs or bumper brackets.
Old Jan 26, 2012 | 12:51 PM
  #21  
pcard's Avatar
70 Cutlass SX
 
Joined: Apr 2011
Posts: 1,042
From: Bermuda
Josh - do you have the underhood light?
Old Jan 26, 2012 | 06:52 PM
  #22  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by oldsrocket88
I could use the hold down bracket/clamp for the jack assembly (looks like a L or J shaped flat piece of metal with a hole in one end) and hoping there is an extension piece on the bottom of the dash that would curve down into the drivers side floor mat just right of the gas pedal, center dash. Let me know if these are aval. Thanks


Sorry i have busy the last few days.

Jack has been sold But i just picked up 2 1966 Toros so maybe one still has it.


Ill have to check my pile of interior stuff to see if i have that pc. But i dont think so.
Old Jan 26, 2012 | 06:57 PM
  #23  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
That reminds me. I have to call a guy back on it. Ill let you know. But i just got 2 66 toros today. One has A/C the other climate control. Does the 66 match? The one that Has just A/C is the one i will part for sure (lots of rust)


Most of the outside stuff on this 70 as toast. I think the hood might be savable. But the rest had issues. Thanks for all the interchange help.





Originally Posted by rocketraider
Josh, if it's a manual A/C car and no one has claimed it, I can use the A/C control head. I can't tell in the pic if it's A/C or heater only. Price and ride to 24520?

Here's some interchange:

Doors, roof and all body glass 1966-1970. Glass is also an interchange with 66-70 Riviera.

Hood 1968-1970

Decklid 1969-1970. All other sheetmetal is 1970 Toro only.

Front 7 rear stub frames 1966-1970

Rocket88, I think the trunk tools are identical 66-70. If the car has the styrofoam holder with cardboard sleeve for them, that is a good score.

If car still has the exhaust pipe shields where the pipe goes over the steering shaft, also a good score. They often got left off in exhaust work and you can tell a difference when it's missing.

There are also rubber flaps between the rear bumper and the trunk pan that are often gone or cut away to access taillight bulbs or bumper brackets.
Old Jan 26, 2012 | 06:57 PM
  #24  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by pcard
Josh - do you have the underhood light?

No it was junk. But i have 2 66s. Are they the same?
Old Jan 26, 2012 | 07:25 PM
  #25  
rocketraider's Avatar
Oldsdruid
 
Joined: Dec 2007
Posts: 10,637
From: Southside Vajenya
66-67 A/C heads are different. One from a 68-70 should work. Thanks for looking.
Old Jan 26, 2012 | 08:32 PM
  #26  
pcard's Avatar
70 Cutlass SX
 
Joined: Apr 2011
Posts: 1,042
From: Bermuda
Josh - if I understand you correctly you are saying you have a couple of 66 underhood lamps? I do not know if they are the same as the 1970. Canyou post a picture?
thanks, Peter
Old Jan 27, 2012 | 09:35 AM
  #27  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by pcard
Josh - if I understand you correctly you are saying you have a couple of 66 underhood lamps? I do not know if they are the same as the 1970. Canyou post a picture?
thanks, Peter

No im not sure if they are there or good. Im saying i just got a couple 66 Toros


Ill check it out today
Old Jan 29, 2012 | 08:41 AM
  #28  
oldsrocket88's Avatar
Registered User
 
Joined: Mar 2010
Posts: 410
From: IL..where the road salt kills..
If you have any side view mirrors on the 66's I'm looking for both sides too
Old Jan 30, 2012 | 01:01 PM
  #29  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by oldsrocket88
If you have any side view mirrors on the 66's I'm looking for both sides too


They have driver side on each. Not sure about the Passenger side. Ill check.
Old Jan 30, 2012 | 02:47 PM
  #30  
bluecab's Avatar
Mostly Gristle
 
Joined: Mar 2011
Posts: 409
From: Wickford, RI
Hey Josh,
Have you ever taken the upper dash out of a Toro ( metal part the windshield sits on) I took my windshield out and found out mine is rotten. I can weld in patch panels, but?
Also need carb parts or a whole carb as mine is toast.
Are you really going to keep one of the 66's?
David
Old Jan 30, 2012 | 02:52 PM
  #31  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by bluecab
Hey Josh,
Have you ever taken the upper dash out of a Toro ( metal part the windshield sits on) I took my windshield out and found out mine is rotten. I can weld in patch panels, but?
Also need carb parts or a whole carb as mine is toast.
Are you really going to keep one of the 66's?
David
Not from the 66s yet. But If any of it is good you got first dib.

Both have complete carbs.

No im not. I need to get money back together. I went out and bought a Custom 71 El Camino yesterday. Im about out of money. LOL Im selling it too.
Old Jan 30, 2012 | 09:40 PM
  #32  
Frogge467's Avatar
67 Toro
 
Joined: Dec 2011
Posts: 16
From: Winter Park, FL
OMG - I have a 63 Corvair convertible and a 67 Toro, never thought of putting a Toro drive train in the Corvair, LMAO!! What is the ROP site listed above? BTW - I need an AM/FM radio for the 67 Toro.
Old Jan 31, 2012 | 08:29 AM
  #33  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by Frogge467
OMG - I have a 63 Corvair convertible and a 67 Toro, never thought of putting a Toro drive train in the Corvair, LMAO!! What is the ROP site listed above? BTW - I need an AM/FM radio for the 67 Toro.
Go for it! Its been done. I think we have a member with one.


ROP = www.realoldspower.com

I have a 66 AM and a 66 Wonderbar am/fm I wont be able to do much the next few days. But ill be back on top of it all later in the week.
Old Feb 3, 2012 | 07:56 PM
  #34  
Frogge467's Avatar
67 Toro
 
Joined: Dec 2011
Posts: 16
From: Winter Park, FL
Do either of the 66's have decent batwing steering wheels? My 67 has tilt/tele and I like the 66 wheels better than the 67.
Old Feb 4, 2012 | 05:59 AM
  #35  
f-85's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 1,507
From: Paw Paw,IL 61353
Originally Posted by Frogge467
Do either of the 66's have decent batwing steering wheels? My 67 has tilt/tele and I like the 66 wheels better than the 67.
Now by "Decent" what do you mean? Like a couple of cracks ok? I know one has 2 or 3 cracks, but not bad. I have to check the other.
Old Feb 4, 2012 | 07:48 AM
  #36  
Frogge467's Avatar
67 Toro
 
Joined: Dec 2011
Posts: 16
From: Winter Park, FL
A couple cracks is fine. This is a daily driver, does not have to be perfect.
Old Jun 3, 2012 | 07:50 PM
  #37  
oldsrocket88's Avatar
Registered User
 
Joined: Mar 2010
Posts: 410
From: IL..where the road salt kills..
Do you happen to have a door interior courtesy light from this Toro? Circled in inserted pic
Attached Images
File Type: jpg
1970toro013.jpg (35.8 KB, 7 views)
Old Jun 13, 2012 | 11:36 AM
  #38  
Guy Fillinger's Avatar
Registered User
 
Joined: May 2012
Posts: 287
A/C Hose

I'm looking for an A/C Discharge Hose (the one with the muffler in line) Do you have that piece? and if so is it in good shape? I'm not looking for junk

Guy
1969 Hurst
Old Jun 15, 2012 | 11:52 AM
  #39  
twintracks's Avatar
Registered User
 
Joined: Mar 2010
Posts: 430
From: SE Wisconsin
Mirror

Josh, From the '70, I could use the outside rearview mirror assembly, if it is a remote mirror, and decent chrome, & no damage.
PLMK. Thanks, Jerry
Old Jan 24, 2013 | 12:23 AM
  #40  
Chose Up's Avatar
Registered User
 
Joined: Jan 2013
Posts: 2
hey... do you still have the grill for the car and the chrome trimming and clips for panels



All times are GMT -7. The time now is 04:17 AM.