2blu442

Well I went through my shelves and tooks some heads down to my favorite machine shop for hot tanking and magnifluxing. This removed the paint and most of the oily cooked on crud but they would need glass bead blasted to get them 100% clean. He removed the rockers but did not pull the valves.

P1010949.jpg


I used an inexpensive micrometer to check for large or small intake valves, not perfect but accurate enough to distinguish between the two.

P1010074.jpg

P1010088-2.jpg

P1010084-2.jpg



They would be shipped in three packages, one for each head with valves and springs, one with the rockers bridges and bolts. The prices below don't include shipping, send me your zip code for a shipping quote. The castings I had done were:

C small valve $125
C large valve $150
E large valve $150
#5 small valve $125

One of the E's has 3 exhaust bolts broken off, the #5's have some valves frozen in the partially open position. Contact me for more photographs.

Other castings I have that are still on core engines or on the shelf still grimy are:

B large valve
C small valve
G unk size
Ga unk size
Ka large valve
#3
#4
#5
#6

Then singles of #2,3,5,7a

It costs me $25 a set to have them hot tanked and magged. If you want to skip that I'll do a visual check for cracks.

I also have J's, 8's and 4A's that would be really cheap or I'd be willing to strip off the bridges, rockers, bolts, valves and springs if you just need some parts. I'm located in Medford Oregon, your welcome to pick up and save the shipping costs if your close enough. John

wmachine

Well presented, and excellent deals!

2blu442

Thank you wmachine, I hope the shipping costs don't add too much to the prices. There appears to be a lot more Olds guys in the mid-west than here in the PNW. John

f-85

Real good deals! Good luck with the sales!

2blu442

Thanks F85. I think I need to post shipping costs to common cities to give people a ballpark on their shipping costs. I've had a lot of interest, but none sold so far. John

wmachine

Okay, how much is shipping to Cleveland Ohio area? You can use 44001.

2blu442

OK... Here's some shipping costs to various cities using two packages of one head each shipped FedEx ground plus one box for the rocker arms and parts in a US Postal Flat Rate box @ $10:

Seattle WA $ 65
Salt Lake City UT $ 65
Los Angeles CA $ 65
Denver CO $ 76
Dallas TX $110
Chicago IL $110
Clevland OH $125
Philadelphia PA $125
Tampa FL $125
New York NY $125

These are shipped to a residence, if they went to a business address that would shave a few dollars off the costs. Let me know if you'd like an estimate from a different city. John

BosMobile

Hey ,I need a set of valves,thier C heads.I'll have to measure to see which valves they are.I'll holar back,thanks,BO

wmachine

Any chance you can band 1-3 sets on a pallet and ship collect via LTL to a business that accepts LTL shipments?

2blu442

wmachine

I can get a pallet and I can strap them down, the only local trucking company I've used is Oak Harbor Freight Lines. I'm not familiar with LTL but if any of the trucking companies here in Medford Oregon will do that I'd be OK with it. John

oldsonharmont

Just a suggestion here, but try Forward Air if they're in your area. I had a buddy that used to ship a lot of motorcycle parts around the country, and they were pretty economical. Just crate up the part and deliver it to the closest major airport and they'll deliver to another major city. (even Cleveland)

2blu442

Update....

The big valve "C" heads and #5 heads that were hot tanked are sold. Still lots more to choose from! John

BosMobile

I'll measure my valves this weekend.Havent been home yet.I'll get with you next week.THANKS,BO

BosMobile

Hey,I have small valves.How much if you strip the ''j'' heads and send me the parts?I'm in N.alabama.35020,its a business adress.thanks.I'm not able to work on my car nearly as often as i'd like to right now,thats why i'm slow getting back,let me know and thanks again,later,BO