Old school Mickey Thompson valve covers
February 26th, 2015, 05:07 PM
#1
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,983
Old school Mickey Thompson valve covers
Nice shape, paint could use touching up. Missing one grommet on
one side, but has a nice matching breather to go with. $160 + shipping.
I will throw in a nice set of rubber/cork composite gaskets as well.
one side, but has a nice matching breather to go with. $160 + shipping.
I will throw in a nice set of rubber/cork composite gaskets as well.
Last edited by tru-blue 442; February 26th, 2015 at 05:11 PM.
...GLWS
J/K 
March 6th, 2015, 10:34 AM
#9
Registered User
Join Date: May 2014
Location: Bass capital of Texas , Lake Fork
Posts: 294
Would you happen to have any other 350 parts? I need some flat top pistons new dub trimming chain mad stuff? I was looking to trade , I think you asked me about a nice black 72 supreme dash I have. Are you still
March 6th, 2015, 10:35 AM
#10
Registered User
Join Date: May 2014
Location: Bass capital of Texas , Lake Fork
Posts: 294
March 6th, 2015, 04:25 PM
#11
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,983
and gear set, I could check on for you. Still looking for a nice W exh.
manifold for right now. It's funny I was going to send you a PM towards
the end of the month to see if they were biting on Fork. I used to take
a cabin every other year at the Minnow Bucket. Really enjoy the area.
I don't really have a lot of stuff for the small blocks. At the moment, I
need to break down a 66 and 67 330 and snag the cranks and flexplates.
I'm afraid I will have to break the pistons out of the 67, (rusty), but the 66 engine was a tired runner that smoked some and now resides in the corner of my son's garage. He has got a 70 350 for his 66 Cutlass that's ready to go.
March 11th, 2015, 09:12 PM
#12
Registered User
Join Date: May 2014
Location: Bass capital of Texas , Lake Fork
Posts: 294
No, it wasn't me on the dash. I think I have a nos TRW timing chain
and gear set, I could check on for you. Still looking for a nice W exh.
manifold for right now. It's funny I was going to send you a PM towards
the end of the month to see if they were biting on Fork. I used to take
a cabin every other year at the Minnow Bucket. Really enjoy the area.
I don't really have a lot of stuff for the small blocks. At the moment, I
need to break down a 66 and 67 330 and snag the cranks and flexplates.
I'm afraid I will have to break the pistons out of the 67, (rusty), but the 66 engine was a tired runner that smoked some and now resides in the corner of my son's garage. He has got a 70 350 for his 66 Cutlass that's ready to go.
and gear set, I could check on for you. Still looking for a nice W exh.
manifold for right now. It's funny I was going to send you a PM towards
the end of the month to see if they were biting on Fork. I used to take
a cabin every other year at the Minnow Bucket. Really enjoy the area.
I don't really have a lot of stuff for the small blocks. At the moment, I
need to break down a 66 and 67 330 and snag the cranks and flexplates.
I'm afraid I will have to break the pistons out of the 67, (rusty), but the 66 engine was a tired runner that smoked some and now resides in the corner of my son's garage. He has got a 70 350 for his 66 Cutlass that's ready to go.
As for the valve covers you said you had a breather that matches? Where abouts are you located
March 11th, 2015, 09:21 PM
#14
Registered User
Join Date: May 2014
Location: Bass capital of Texas , Lake Fork
Posts: 294
Wow I just realized the 6th that was the dang day I cut my finger off. Man with all that's gone on and all the pain meds I didn't even realize . I had forgotten I asked about the stuff. I am intrested if we can work a deal as one day ill need the stuff
March 12th, 2015, 04:28 AM
#15
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,983
Man that sucks. Cutting off appendages, not good.
Here is a shot of the timing set, they are Mellings.
I can go $200 for all and throw in a gasket set for the gears, plus shipping.
I'm not sure what you mean by breather, it is with the covers. Unless you
need a 2 or 4 bbl. breather, which I have some as well. I'm in Marble Falls,
just West of Austin.
Here is a shot of the timing set, they are Mellings.
I can go $200 for all and throw in a gasket set for the gears, plus shipping.
I'm not sure what you mean by breather, it is with the covers. Unless you
need a 2 or 4 bbl. breather, which I have some as well. I'm in Marble Falls,
just West of Austin.
Last edited by tru-blue 442; March 12th, 2015 at 04:43 AM.
March 26th, 2015, 03:12 PM
#16
Registered User
Join Date: Mar 2015
Posts: 3
March 26th, 2015, 05:09 PM
#18
Registered User
Join Date: Mar 2015
Posts: 3
March 26th, 2015, 06:06 PM
#19
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,983
Thread
Thread Starter
Forum
Replies
Last Post
real57vetteguy
Parts For Sale
0
June 26th, 2014 06:13 AM
real57vetteguy
Parts For Sale
6
March 28th, 2014 04:21 PM
