I have a few parts from the parts car I am yanking off.

Car is a 68 or 69 not sure.


Please no tire kickers I have to much going on to answer PM's about a bunch of stuff. I don't know ANYTHING about this stuff as I bought the car for a few parts so everything is AS IS.

I was told it all works, the feller had "started" a restore on it and then abandoned it. I have checked for rust and anything abnormal. All the fittings and ends have been intact to shield from elements. If your truly interested and not kicking tires I will go out of my way to get better pics with an actual camera.

Some of the body parts have rust and need sanded etc but there solid no rust through. Not going to give the stuff away but I don't want to see it just sit and go to waste as the car is heading to the scrap yard. I have pulled most of this stuff off. If I don't have pics of it, sorry but If your seriously interested I will figure something out. If you just want to see a picture please google and look. The car sits on other side of town so it takes time to snap images.

1. Convertible Frame in decent condition. I will clean old top off and clean up before it's sold.
2. Hydraulic system complete with hoses and rams
3. Power trunk assembly COMPLETE with glove button, hose, and trunk module and firewall vacuum bulb
3. Trunk light with cover
4. Convertible doors decent shape w/glass and partial window
5. Dash gauges with standard indicator, speedo w/column indicator and clock no tach
6. Single bumper frame mount with the 2 extender rods
7. Fender extenders in decent shape.
8. AC/Heater controls on dash
9. Ignition in dash w/key. Need to look for key but I do have it

Top not bent no rust decent shape considering






Top Hydraulic and piston




Trunk Light


Doors





Gauges - little paint removed but could be nice restored

 

Not to be picky, but are you sure that's not a 1968? 1969 should not have vent windows in the doors. Lots of parts there. Good luck.

Adam

 

Don't know. Vin and trim tag was pulled off along with half of everything else. It appeared the PO was going to replace the cowl and rusted dash area where tags were at? IDK? I didn't go look. I just seen the 69 style dash and assumed. It very well could be a 68 bro. I'll revise and list 68/69 parts thanks for pointing that out. My knowledge of body styles/panels dont go back that far it appears.

Also, the doors could possibly be not the original to that car? IDK that either.

 

Ignition switch is in the dash so it is a 68.

 

^^ Roger that. If I could change ad title I would. Sorry guys.

either way most parts will fit 69 except door I believe? IDK what exactly is 68 specific. I thought everything would change over from 68 to 69?

Also if your interested better speak up and PM quick. This baby goes to scrap in 2 days.

 

A moderator might be able to do that or leave as is. Like you said the parts, many of them, are the same. I have a '68 and look at all the 68/69 listings as others do too. Some 1968 only bits would be...

dash insert, the plastic with ignition and wiper switch holes.
speedometer, 68 and 69 have different cables.
vent window, I think the door itself can be used on a 69 if the interals are switched.
rear tail light/trunk lip. That whole section cut out is desirable.
trunk, lid if you have one.

Will you ship to Canada? I would be intereset is some little pieces if you have them.

Adam

 

PM sent