Lots of brackets, A/C alternator brackets, at least one non- A/C alternator bracket (I think it's missing the support tube), power steering brackets from various years. Probably a couple A/C compresosr brackets in there too. I see at least one flexplate and there's probably a few more.




Tell me what you're looking for and make me an offer. I'm cleaning this stuff out or I'm going to throw it away if I don't sell it.

 

do you have alternater brackets and power steering brackets for cutlass/442 non air car

 

I have two of the three parts for the alternator bracket. I'm missing the tube brace.


I'll have to check for the power steering brackets. I probably have them.

 

I n

 

What is the tube brace. I would need as well the power steering brackets , pm sent

Bruce

 

non A/C alternator mounts are made up of three pieces. I don't have the tube brace


This is a pic of a complete set:


(not mine)

 

I need power steering pump or brackets for a/c engine thanks Rick

 

Let me know if anything here matches what you need.


$10 each for brackets, $35 for a power steering pump with the brackets. $15 for the flex plate, $25 for the steering box. $25 for the core 404584 water pump, $15 for the balancer, $10 for the wiper motor (I have no idea if it works). $15 each for the timing covers.


All prices plus shipping




[img]https://oi67.tinypic.com/vffif5.jpg[/mig]

 

Which part is the tube brace in the picture regarding alternater brackets. Iwould also need a set of power steering pump and brackets with bolts

Bruce

 

The tube brace is one in the lower right of the pic I posted in response to your previous post.


Both the red bracket and pumps shown above are complete but I don't have the bolts (other than what hold the brackets together) or the spacer that goes between the lower bracket and the block, timing cover or water pump (I can never remember where it is until I put one together and it doesn't line up right). There is also a special bolt that goes to the water pump that has like a 3/8 thread into the pump and a 7/16 stud

 

Is that an open faced alternator? If so that could be worth some serious money. What's the numbers on it? Does it have the raised diamond shape on the backside?

John

 

John


I thought it might be too but the only thing I can find on it is "MADE IN USA". What else should I look for?

 

Mike, here's an old thread with some photos of the one I'm thinking of.

https://classicoldsmobile.com/forums...42-w-30-a.html

 

The pump with two groove pulley will work for me. I live near Syracuse, do not have to pay to ship. e/mail your phone number to set a day and time. Rick

 

John

do you still have alternater brackets and power steering pump w/brackets

Bruce

 

Mike,

Do you still have any of these brackets? (See pic) If so I'll take one.
Also need the studs and the spacers.


Thanks

Rick

 

Mike,is the two groove pulley pump and brackets for sale? thanks

 

Yes, Were you the one from the Syracuse area that was looking for them?

 

Yes Mike I was interested in the two groove pump. I live near Syracuse Rick

 

I need the power steering brackets for a 1970 olds non AC if you have any left. Thanks chas

 

Do you have a '70 engine lift bracket in your inventory?
Thanks.

 

Yes I have one. I have no idea what makes it specific to 70. I can email a pic if you need one. $10 + shipping

I believe that all non a/c cars used the same brackets from at least 68-72 but I'm sure others can answer here. Both single pulley pumps with brackets are still available.

 

PM sent regarding the lift bracket.
Do you guys in Seneca Falls have to watch Its a Wonderful Life daily this time of year?

 

The town lives it this time of year. I've never seen the movie but I've run the 5K four out the six years they've had it. Over 3800 runners this year. Pretty good for a race that only started six years ago.


I got my six and twelve year old to run with me this year:

 

Looking for an Upper A/C Bracket for a 74-76 455

Thanks!

 

Does it look like any of the brackets in the pics? Do you have a part number?

 

All the complete power steering pump bracket sets are sold. I have two or three with two of the three brackets (all are missing the piece that bolts back to the head)


Alternator is sold


Cast A/C bracket (lower one in the pic) is sold


Still have all the other stuff


Offers on it all?

 

Hi Mike send me a picture of the power steering pump and brackets. Send it to bblack7819@yahoo.ca

thanks Bruce

 

Mike do you have water pumps

Bruce

 

I have the red one in the picture. It should be considered a core. I don't know the number but I can get it if you're interested.





The brackets and pumps circled in the picture below. I don't have any of the bracket pieces left that tie back to the exhaust manifold

 

 

Mike
yes pls. check the casting number on the water pump and how much for the power steering pump circled.

Bruce

 

$25. + shipping

 

Mike how much for the power steering pump.

thanks

 

$15 for any of the pumps plus shipping but I have no idea what a PIA it may be to ship. I assume I'd make sure it was drained and then double wrap it in plastic

 

Hi mike will send you a PM

 

Hey Mike if Bruce passes on the 404584 WP I will take it.

Brett

 

Brett

I haven't heard anything from him. It's yours. Pm m a zip and I'll figure shipping. Thanks

 

Is the flex plate, balancer, and the timing covers still available?

 

Yes. They are all still available.