DX Blocks, 425A & 400G Motors, 350 Blocks, etc.
July 18th, 2017, 06:53 AM
#1
Registered User
Thread Starter
Join Date: Feb 2009
Location: Mosheim, TN
Posts: 153
DX Blocks, 425A & 400G Motors, 350 Blocks, etc.
Need to clean house. All items located near Warroad, MN. Can deliver on way to Topeka next week. Traveling I-29. Let me know by Saturday, July 22nd. Might be able to strap to pallet and ship from a Fastenal.
Sold and Moved
Rick
Sold and Moved
Rick
Last edited by 37OldsCoupe; February 5th, 2022 at 09:01 AM.
September 8th, 2018, 05:35 AM
#3
Registered User
Thread Starter
Join Date: Feb 2009
Location: Mosheim, TN
Posts: 153
Still have all this. Make offer on any of it.
Also have Moldex billet crank with center counterweights. 3.385 stroke, BBC journals. $1400 plus shipping.
Also have Moldex billet crank with center counterweights. 3.385 stroke, BBC journals. $1400 plus shipping.
Last edited by 37OldsCoupe; December 14th, 2020 at 04:03 PM.
October 28th, 2018, 12:52 PM
#8
Registered User
Thread Starter
Join Date: Feb 2009
Location: Mosheim, TN
Posts: 153
Sorry, didn't see your post. Yes still have them.
Dropped price of DX blocks to $200, 425 motor to $400.
400G bare block - $100, manual crank - $75, A heads w/studs & rockers - $100
Need to move this stuff.
Rick
Dropped price of DX blocks to $200, 425 motor to $400.
400G bare block - $100, manual crank - $75, A heads w/studs & rockers - $100
Need to move this stuff.
Rick
July 25th, 2019, 06:17 PM
#9
Registered User
Join Date: Jul 2019
Posts: 2
Need to clean house. All items located near Warroad, MN. Can deliver on way to Topeka next week. Traveling I-29. Let me know by Saturday, July 22nd. Might be able to strap to pallet and ship from a Fastenal.
3 DX blocks - $200 each
Diesel crank - $50
1965 425A motor with A heads - $400
2 350 gas blocks - $50 & $100
Pair of Mondello ported G heads with port matched Port-O-Sonic, Crane Gold rockers & custom pushrods, $1100; with GMPP valve covers $1250.
Bare 455 block, .030 over $200 (Will sell only if heads sell)
455 N crank, .010 & .010, rod journals need cut $75
1 #5 Mondello ported head - $150
2 #8 heads, stock - $100/pr
Pair of notched valve covers, some small dings - $75
TH350 core - $75
Accel dual point distributor - $40
Other miscellaneous parts
I will be adding more stuff later.
Rick
3 DX blocks - $200 each
Diesel crank - $50
1965 425A motor with A heads - $400
2 350 gas blocks - $50 & $100
Pair of Mondello ported G heads with port matched Port-O-Sonic, Crane Gold rockers & custom pushrods, $1100; with GMPP valve covers $1250.
Bare 455 block, .030 over $200 (Will sell only if heads sell)
455 N crank, .010 & .010, rod journals need cut $75
1 #5 Mondello ported head - $150
2 #8 heads, stock - $100/pr
Pair of notched valve covers, some small dings - $75
TH350 core - $75
Accel dual point distributor - $40
Other miscellaneous parts
I will be adding more stuff later.
Rick
July 27th, 2019, 07:49 AM
#10
Registered User
Join Date: Apr 2012
Location: Bradenton, FL
Posts: 1,477
In my experience, anything east of Colorado is under $200 business to business with a forklift or loading dock. I use UShip.com most of the time. Another $75 or so if it's going to a house and needs a liftgate.
Thread
Thread Starter
Forum
Replies
Last Post
