"CT" Master Cylinder - excellent stamping, etc - will need sleeving
#1
"CT" Master Cylinder - excellent stamping, etc - will need sleeving
Here is a super nice "CT"-stamped drum brake original Delco Moriane Master Cylinder.
>EXCELLENT/STRONG "CT" stamping - super visible and crisp - not all pitted up or corroded around the stamping
>Bleeder style master cylinder
>Lid/Cap is super nice - original cap (not a repro) to this master cylinder w/no pitting on the topside and nicely replated
>Bale for cap - nice condition and wasn't pitted - replated in phosphate
>Rubber seal for cap is nice and clean
>New bleeders included
>NOTE: There is some pitting in the piston bore so this should be sleeved (White Post Restorations, etc) prior to rebuilding
$120 + shipping. PM for payment options
>EXCELLENT/STRONG "CT" stamping - super visible and crisp - not all pitted up or corroded around the stamping
>Bleeder style master cylinder
>Lid/Cap is super nice - original cap (not a repro) to this master cylinder w/no pitting on the topside and nicely replated
>Bale for cap - nice condition and wasn't pitted - replated in phosphate
>Rubber seal for cap is nice and clean
>New bleeders included
>NOTE: There is some pitting in the piston bore so this should be sleeved (White Post Restorations, etc) prior to rebuilding
$120 + shipping. PM for payment options
Last edited by 70Post; November 26th, 2022 at 07:34 AM.
#8
Will check to see if I saved them......may have been drilled into to aid removal. ILT and others sell rebuild parts/kits w/both pistons and the typical re-sleeving/rebuilding places should have them as well.
EDIT/ADD: Just got off the phone w/Whitepost Restorations and they can deal w/missing pistons, etc. They reproduce one of the two pistons as well (the forward or "secondary" piston).
Will still check to see what I have, piston-wise from the teardown process.
EDIT/ADD: Pistons shown in pic.....too much corrosion to re-use IMO.
The "beauty" of this MC is the super nice original stamping......"CT" is CLEARLY visible w/no loss of definition due to rust/pitting/etc on the machined stamp pad...a common problem on original MC's. Super nice ORIGINAL MC lid.....not a repro so to lettering, etc IS right.
EDIT/ADD: Just got off the phone w/Whitepost Restorations and they can deal w/missing pistons, etc. They reproduce one of the two pistons as well (the forward or "secondary" piston).
Will still check to see what I have, piston-wise from the teardown process.
EDIT/ADD: Pistons shown in pic.....too much corrosion to re-use IMO.
The "beauty" of this MC is the super nice original stamping......"CT" is CLEARLY visible w/no loss of definition due to rust/pitting/etc on the machined stamp pad...a common problem on original MC's. Super nice ORIGINAL MC lid.....not a repro so to lettering, etc IS right.
Last edited by 70Post; August 25th, 2023 at 01:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Gmpartz
Parts For Sale
2
October 29th, 2021 01:16 PM