When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I mistakenly ordered an extra set of these A-arm seals that get stapled to the plastic inner fenders. I figured instead of paying the shipping to return them to Inline Tube I would discount the price and pass along the savings to a fellow CO member. These are high quality REM parts and come with the stainless steel staples. I'll even throw in a few extra staples in case you need them. I'd like $16 + shipping.
Orlando:
I taped the new A-arm flaps to the plastic fender with painters' blue tape. Then I drilled thru the original holes in the fender with a very small drill bit (1/16" or smaller). I used a small block of wood as a back stop when drilling the new holes. be careful not to drill into your fingers! Push the stainless steel staples thru the newly drilled holes, remove the blue tape, fold the staples over by pinching with a pair of pliers then hammer them flat with body hammer and dolly. It took me about 15 minutes per fender. edit: the inner fenders were not on the car.
