80-85 Delta 88/80-90 Custom Cruiser stuff.
#1
80-85 Delta 88/80-90 Custom Cruiser stuff.
Does anyone need parts for these cars? I have a lot of extra parts and if anyone needs something, let me know. I may be able to help out.
#5
I'll have to go check.
I know I have a pair of sun visors, waste basket, probably 2 sets of dashboard plates and a bunch of trim.
What exactly are you in need of? Hopefully I can help.
I know I have a pair of sun visors, waste basket, probably 2 sets of dashboard plates and a bunch of trim.
What exactly are you in need of? Hopefully I can help.
#6
Well, the trim that goes around the radio without any cutouts for swtches. I think the rear window defrost and cruise swtch would go there? I have niether, but the extras I have are all made for the switches. Blue interior trim for a four door. I'm not sure what else would fit my 78 and 79
#7
#9
I have 3 of them, and they all have the rear def. switch cutouts. In fact, one of them has a notch out for 2 switches. I'm also willing to bet that GM tried to get creative and had different woodgrain patterns for 77-79. Sorry I wasn't much help.
#10
Any 83 taillights? or any taillight other than the 84/85 two colored ones?
Also that rubber fender liner that goes over the upper "A" arms and keeps the rain water from hitting the spark plugs?
Also that rubber fender liner that goes over the upper "A" arms and keeps the rain water from hitting the spark plugs?
#11
83... hmm I believe the only pair that I have are the ones on my car. Are you referring to the 83-85 Royale brougham tail lights? (see pic) If you need any extras of the 1/2 amber ones I have like 4 pairs.
As far as the A-arm covers go.... I have at least 2 extra pairs of them.
I called Gm and asked about acquiring a new sheet of that material because I wanted to make my own new ones, and they wanted over 100 bucks. WTF?!
I then went to the boneyard and jacked every single pair there. Make me an offer on a pair, I don't want to see anyone paying them 100 bucks for that crap.
P.S. I am in need of rear quarter/bumper fillers if you have any extras Redog.
As far as the A-arm covers go.... I have at least 2 extra pairs of them.
I called Gm and asked about acquiring a new sheet of that material because I wanted to make my own new ones, and they wanted over 100 bucks. WTF?!
I then went to the boneyard and jacked every single pair there. Make me an offer on a pair, I don't want to see anyone paying them 100 bucks for that crap.
P.S. I am in need of rear quarter/bumper fillers if you have any extras Redog.
#12
I do have a pair of 1980 Tail lights. The center rocket emblem fell out of the silver rectangle on them however. So you would either have to find new inserts, or shave them. Here is a pic of the 80 tail lights with the emblems shaved.
#13
I don't have any extra bumper fillers, last time I when to the junkyard they had no Deltas, or any b-bodies for that matter.
I don't like the 84-85 half and half tailights and I would like the rocket on the taillights.
For the A Arm covers, a pair, $15 shipped?
I don't like the 84-85 half and half tailights and I would like the rocket on the taillights.
For the A Arm covers, a pair, $15 shipped?
#16
Delta 88 /custom cruiser
Ok I grabbed a few of the boxes down for you guys and took a picture of a bunch of good parts that I'd like to see used/gone.
There's much more, like I said this was 2 boxes worth and I believe I have 5 or 6 more.
Make an offer.
Delta 88 2door rear wheel moldings
2 lunati cams stickers
4 ebrock stickers
2 arp bolt stickers
Fel-pro intake mani gasket for 85-90 307
fel pro sbo water pump gaskets
silver ex gaskets
olds vcover gaskets
4power window regulators for custom cruiser
2 sport mirrors for custom cruiser
door panel screw plates
rear view mirror
Customcruiser red/maroon 4 door armrests/ashtrays rear
dash ash tray
coolant overflow bottle
door handles
4 door power lock actuators
washer fluid bottle
dash clock
glove box
sun visors
ECM
There's much more, like I said this was 2 boxes worth and I believe I have 5 or 6 more.
Make an offer.
Delta 88 2door rear wheel moldings
2 lunati cams stickers
4 ebrock stickers
2 arp bolt stickers
Fel-pro intake mani gasket for 85-90 307
fel pro sbo water pump gaskets
silver ex gaskets
olds vcover gaskets
4power window regulators for custom cruiser
2 sport mirrors for custom cruiser
door panel screw plates
rear view mirror
Customcruiser red/maroon 4 door armrests/ashtrays rear
dash ash tray
coolant overflow bottle
door handles
4 door power lock actuators
washer fluid bottle
dash clock
glove box
sun visors
ECM
#17
Redog. here's a picture of the a arm felts.
One of them is torn a bit, but it will still cover.
Let me know if you could still use them.
If you would like some full sized pics, just PM me an email.
One of them is torn a bit, but it will still cover.
Let me know if you could still use them.
If you would like some full sized pics, just PM me an email.
#18
^^ Yes that's what I need.
Now I know why what I have didn't fit, looks nothing like that
They will do just fine. Can't think of anything else right now, I have some parts I'm going to try to get rid of too.
Now I know why what I have didn't fit, looks nothing like that
They will do just fine. Can't think of anything else right now, I have some parts I'm going to try to get rid of too.
Thread
Thread Starter
Forum
Replies
Last Post
Fred Kiehl
Parts For Sale
0
June 16th, 2013 04:55 AM
dedsleds
Parts For Sale
0
February 10th, 2012 02:26 PM
Eightupman
Parts For Sale
0
September 12th, 2010 07:45 AM