Just found a 74 delta 88 conv. in a junkyard. No engine or dog house, dr door ok, pass door junk, quarters junk, trunk junk, pw, pl, ps, tilt, p trunk, dash junk, rear seat there & all conv parts? Except pump. White int. Quarter glass good, good rear bumper, tail lites cracked, housings good, no rims, single trak, conv trim around windshield trashed.
any interest??
Call scott for more info.
317-727-7041

 

Do you have any pictures?
Does it have cruise control? Some of those parts could be useful.

 

Pictures coming soon as I figure how to get them from my smarter than me phone to my computer. No cruise.

 

Just pulled entire conv top frame in case any one needs parts. Rear upper panels are decent.

 

I think your username explains what you should scavenge...
-Everything but the Oink...
(Everything that is in usable or restorable condition that it...)

Post for sale all you do not need - I am sure someone out there needs the stuff and would appreciate your efforts.

 

Just sent you an email because I saw your post on Realoldspower before I saw it here and I couldnt post on the other site for some reason. Anyway, I'd like the door panels if they have the metal trim and power trunk set up. Also wouldnt mind the power window set up if still available. Let me know Thanks, Mike

 

Location maybe?

 

Sorry, not sure why my hometown is not displayedin my user info? I'll see if I can change that. The car is in Indianapolis, Indiana. Soon to be turned into 3 Hyundais I'm sure.

 

that tilt and power trunk release will sell, plus all convert related parts.....that trans crossmember is worth buying also......desireable part

 

Back to the yard for more inventory then. Thanks.

 

Let's see those pics! I may be interested in a few things as well.

 

Got a useable LH top drive cable?
How about a LH windshield top / header bar latch?
Rear quarter-panel courtesy light lenses?
Also, not a convertible-only item, but I'd be willing to pay a small amount for the center front seatbelt as well, if the bolts aren't rusted permanently in place (I'll probably cut one out of a car at a local yard in the spring otherwise).
Another non-convertible-only part is the rear half of the hood release cable - if you can figure out how the heck to get the darn thing out!

Others may be interested in the top motor, if you haven't grabbed it yet.

Thanks,

- Eric

 

Here is a link to the pictures of the Delta. I have removed the complete power lock & window systems. I have all the window motors, lock solenoids(boots torn & locked up & won't move), uncut & damage free wiring harness', quarter windows & trim, & a couple other parts. Let me know what you guys want. Tilt column was already gone Seats, & all door & rear panels are still there. some of the clips that hold the wiring harness to the inner doors are broken.

http://s856.photobucket.com/albums/a...20convertible/

 

Great work, Scott! Your handle appears to be well earned.

I'll call you,

- Eric

 

If you have the square metal power LOCK switches, i would be interested in them, as long as they have the word LOCK on them...

 

Hi there, I live in Stockholm Sweden with a -71 Olds Delta 88 Royale Conv. owned and cared for since 1977. My plastic interior parts (door panels and on both sides of the rear seat) are in a bad condition (the rest of the car is very good unrestored exept motor.
I´m very interested in the interior parts and the the mirrors!.
Are you able to ship?

 

Rob,
I have 3 of the square metal lock switches with "lock" on them. Two of them have many pimples on them, but no pitting. The other one has better chrome, but one 1/4" scratch on it. Here is a updated link with the power lock switches & convertible top frame & other parts off this car. Let me know what you think.
Thanks.

http://s856.photobucket.com/albums/a...20convertible/

 

Johan,
I sent you an email, I can get the lower door panels & rear panels, I already have the rears. I can ship them to Sweden, I would think shipping will be quite expensive, but if you're willing to buy them, I'll ship them.
I would need your complete address also.
Send me a pm & we can get all this started.
Thanks.
Scott