When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
71-72 charcoal canister bracket Cutlass, 442, H/O.
These are hard to find with no rust holes.
This one is in very nice shape with no rust holes. Had slight pitting on inside but exterior is extremely clean. Has original clamp screw. Was bead blasted and finished in GM resto black. SOLD...
$75 plus shipping from 32828.
Rick, I would like to get this from ya, but as mine sits, it won’t fit due to the dealer installed radiator overflow tank bracket. I have to figure something out to be able to do this with minimal violence to that area.
Rick, I would like to get this from ya, but as mine sits, it won’t fit due to the dealer installed radiator overflow tank bracket. I have to figure something out to be able to do this with minimal violence to that area.
Joe - I believe you have only a puke overflow bucket since there is no return line for siphoning coolant back into the radiator. Most (Many) vehicles of these years had the overflow rubber tube clipped to the side of the radiator. Is your overflow puke tank really "doing anything"? Just something to consider.
Yes, it is actually setup to siphon back into the rad. I have a siphon tube immersed in coolant in the tank. The cap is a wiper fluid cap with a tube that is cut to length to reach the bottom of the tank.
I think I may be able to move the overflow tank bracket a little away from the center of the hole that the canister sits and make just enough room for the bracket. If I could get a measurement from the center of the canister mount out to the edge of it, I could make a measurement here to see if I have enough room.
