'70 - '72 floor shift auto console -restored - black
Thread Starter
Registered User
Joined: May 2008
Posts: 3,634
From: Austin, Texas
'70 - '72 floor shift auto console -restored - black
'70-'72 Cutlass, etc floor shift auto console - fully restored....
>Not cut for dual gate but I have the pattern to do that if you need it pre-cut. Can do the same thing for a 4 speed manual conversion and can finish any repro 4 spd adapter parts you provide to match this finish (NOTE: the "black" plastic color on the repro adapter is NOT black and will need to be painted to match). No cost for the conversion work - you provide the parts if it's a 4 speed conversion.
>Fully restored and a few small holes and a couple cracks repaired in the process. Console was "bare" before (ie - not painted) and was black originally. Prepped correctly and repainted black.
>All other components restored, etc - box liners stripped bare and reflocked, all gbox door components refinished, etc. Basically - EVERY part on this was restored/refinished - even down to the alum trim, white shift lamp reflector, etc....new liner screws, replated latch (not installed when I took these pics but it's included)....you get the idea.
>Regular floor shifter with repro cable available as well.....pulled apart, stripped to bare metal, epoxy painted, some parts zinc plated, etc. Original chrome shift handle is driver quality and could be rechromed for a show type car.
>Chrome/woodgrain insert can be purchased from repro vendors or I MAY have a rechromed insert here (no woodgrain) at extra cost.
>Will include correct style forward mounting point screws that attach the console to the front floor bracket - not sold by repro vendors.
Pics below - can send more and discuss VIA EMAIL. Post any interest you have here and we can take it to email after that---much easier/quicker for sending pics and answering questions.
Console - $400 + shipping
Shifter setup w/cable - $150 + shipping
Check or MO - no paypal.
>Not cut for dual gate but I have the pattern to do that if you need it pre-cut. Can do the same thing for a 4 speed manual conversion and can finish any repro 4 spd adapter parts you provide to match this finish (NOTE: the "black" plastic color on the repro adapter is NOT black and will need to be painted to match). No cost for the conversion work - you provide the parts if it's a 4 speed conversion.
>Fully restored and a few small holes and a couple cracks repaired in the process. Console was "bare" before (ie - not painted) and was black originally. Prepped correctly and repainted black.
>All other components restored, etc - box liners stripped bare and reflocked, all gbox door components refinished, etc. Basically - EVERY part on this was restored/refinished - even down to the alum trim, white shift lamp reflector, etc....new liner screws, replated latch (not installed when I took these pics but it's included)....you get the idea.
>Regular floor shifter with repro cable available as well.....pulled apart, stripped to bare metal, epoxy painted, some parts zinc plated, etc. Original chrome shift handle is driver quality and could be rechromed for a show type car.
>Chrome/woodgrain insert can be purchased from repro vendors or I MAY have a rechromed insert here (no woodgrain) at extra cost.
>Will include correct style forward mounting point screws that attach the console to the front floor bracket - not sold by repro vendors.
Pics below - can send more and discuss VIA EMAIL. Post any interest you have here and we can take it to email after that---much easier/quicker for sending pics and answering questions.
Console - $400 + shipping
Shifter setup w/cable - $150 + shipping
Check or MO - no paypal.
Last edited by 70Post; Aug 12, 2017 at 11:06 AM.
Registered User
Joined: Jan 2014
Posts: 14
Is this console still for sale? Thanks
'70-'72 Cutlass, etc floor shift auto console - fully resto
>Not cut for dual gate but I have the pattern to do that if you need it pre-cut. Can do the same thing for a 4 speed manual conversion and can finish any repro 4 spd adapter parts you provide to match this finish (NOTE: the "black" plastic color on the repro adapter is NOT black and will need to be painted to match). No cost for the conversion work - you provide the parts if it's a 4 speed conversion.
>Fully restored and a few small holes and a couple cracks repaired in the process. Console was "bare" before (ie - not painted) and was black originally. Prepped correctly and repainted black.
>All other components restored, etc - box liners stripped bare and reflocked, all gbox door components refinished, etc. Basically - EVERY part on this was restored/refinished - even down to the alum trim, white shift lamp reflector, etc....new liner screws, replated latch (not installed when I took these pics but it's included)....you get the idea.
>Regular floor shifter with repro cable available as well.....pulled apart, stripped to bare metal, epoxy painted, some parts zinc plated, etc. Original chrome shift handle is driver quality and could be rechromed for a show type car.
>Chrome/woodgrain insert can be purchased from repro vendors or I MAY have a rechromed insert here (no woodgrain) at extra cost.
>Will include correct style forward mounting point screws that attach the console to the front floor bracket - not sold by repro vendors.
Pics below - can send more and discuss VIA EMAIL. Post any interest you have here and we can take it to email after that---much easier/quicker for sending pics and answering questions.
Console - $400 + shipping
Shifter setup w/cable - $150 + shipping
Check or MO - no paypal.
>Not cut for dual gate but I have the pattern to do that if you need it pre-cut. Can do the same thing for a 4 speed manual conversion and can finish any repro 4 spd adapter parts you provide to match this finish (NOTE: the "black" plastic color on the repro adapter is NOT black and will need to be painted to match). No cost for the conversion work - you provide the parts if it's a 4 speed conversion.
>Fully restored and a few small holes and a couple cracks repaired in the process. Console was "bare" before (ie - not painted) and was black originally. Prepped correctly and repainted black.
>All other components restored, etc - box liners stripped bare and reflocked, all gbox door components refinished, etc. Basically - EVERY part on this was restored/refinished - even down to the alum trim, white shift lamp reflector, etc....new liner screws, replated latch (not installed when I took these pics but it's included)....you get the idea.
>Regular floor shifter with repro cable available as well.....pulled apart, stripped to bare metal, epoxy painted, some parts zinc plated, etc. Original chrome shift handle is driver quality and could be rechromed for a show type car.
>Chrome/woodgrain insert can be purchased from repro vendors or I MAY have a rechromed insert here (no woodgrain) at extra cost.
>Will include correct style forward mounting point screws that attach the console to the front floor bracket - not sold by repro vendors.
Pics below - can send more and discuss VIA EMAIL. Post any interest you have here and we can take it to email after that---much easier/quicker for sending pics and answering questions.
Console - $400 + shipping
Shifter setup w/cable - $150 + shipping
Check or MO - no paypal.
Thread Starter
Registered User
Joined: May 2008
Posts: 3,634
From: Austin, Texas
Archael - Sorry, I overlooked your question. Let me see what parts "cdrod" needs with the main console. If he doesn't need the shifter then it will be available.
If he does need the shifter I HAVE ANOTHER SHIFTER SETUP in similar condition......brackets beadblasted and epoxy painted, shift gate plated, new fasteners, screws to mount it to the floor, etc. The only difference is there is a shift cable for the car but it's slightly used with a bit of the black plastic "casing" around the outer cable windings chewed up a bit. DOES NOT AFFECT FUNCTIONING and the area I'm talking about is up near the SHIFTER END of the cable....not visible when installed. The shifter handle is like the other one....driver quality only....has bubbling in the chrome.
I will post pics of the second shifter setup if you have interest.
Thanks Bee St. Louis and OldsAl for the compliments.
Last edited by 70Post; Dec 31, 2017 at 09:08 AM.
Thread
Thread Starter
Forum
Replies
Last Post
David DeCan
Parts Wanted
1
May 15, 2016 07:26 AM
mstudley265
Parts Wanted
3
Jul 22, 2013 10:03 AM
