Getting rid of all the mostly 68-69 stuff that I’ve accumulated and will probably never need again. All prices do not include shipping. I travel quite a bit in the Northeast so I can usually work out free delivery in that area of the country. I've got a lot more and will add and delete stuff as it sells



Complete Power trunk set-up EXCEPT the elusive acutator rod, $100





68 non A/C dash pad. No cracks, a couple small dents that are from a broken windshield laying on the plastic. I tweaked it over the summer by drilling a hole in the plastic behind, pushing out so it looks a lot better than this pic. $150

 

I need a 68 console latch. If you have one, how much do you need?

Steve

 

Sorry, I don't have one. Everything I have would be for a four speed and I don't have any console stuff except what's in the next posting below

 

Few more things:
Two 65-69 top plate (top one is sold. Someone put three holes in for gauges ($45). (no, the console is not included )

Here's a shot of the top plate installed in the console

 

Complete driver’s side headlight housing that needs to be restored. Missing one post of the back. Crack on top as shown $40

 

Is the dash pad the same on a 69? I know they look the same but are they interchangeable?

 

Do you have a trunk lid or fan shroud for a '68 442 convertible?

Eric

 

how about a fan shroud for a 69 cutlass or 442

 

Mike,
You have a PM.

Gene

 

The skin of the trunk lid is solid but the lower inside isn't great but could be repaired. Say $35 for the trunk lid

Here's a crappy pic of the trunk lid. If you're interested I can pull it out and get better pics of the underside

 

No. I have very few parts that are specific to 69. I have one fender eyebrow moulding and one fender brace. I can't remember which sides

 

Sicky, I know they are interchangeable but I don't know if a 69 non-A/C pad has vents. 68 does not.

 

PM sent on trunk molding set...

 

You have a PM

 

I'm making a trip for work down Route 17 through Binghamton, NY to I-84 then over to Sturbridge, MA tomorrow if anyone is interested in any large items

 

Would you happen to have a steering wheel for a 68 Cutlass? I would still be interested if the outer ring is cracked as long as the spokes and center are Ok. If you have one could you send photos and a price + shipping to 08332.
Thanks
Doug

 

Sorry, no steering wheels

 

Ok! Thanks for the reply

 

I am looking for a 1968 Cutlass Horn relay, another 1968 one year only item lol. I bought a used one and it arrived today it is in pitiful condition so I'm looking for a nice one. The cover doesnt matter as i have a nice one of those but the plastic where the connectors go on if they weren't all busted and ready to turn to dust that would be really cool. Please let me know if you have one. Thanks ...Todd

 

Todd,

I have one. The good news is the plastic is in good shape. The bad news is two of the tabs are broken off and I haven't bench tested it to see if it even works.

I know if you're looking for function rather than presentation I bought a new one for my car from a regular auto parts store. I remember it wasn't cheap but it plugged right in. I never put the original and the new one next to each other to see the difference.

 

Tabs in where the wires push onto? If that is the case then it is no good to me as I need it to function. Thanks for looking though I appreciate it.

 

Yes, That's what I mean

 

Im needing th350 bracket and cable for 3 speed auto

 

I don't have any auto trans parts except a dust cover for a Jet-a-way

 

How about any non a/c kick panels? I'm planning on cutting them up to put speakers in, so condition isn't really critical.

Thanks,
Tony K.

 

I've got a set that the driver's side is missing the vent **** and the driver's side grill is broken but they are clean with no cracks. The passenger side has a little loss of grain as I used some Simple Green and Steel wool to clean it up. I'll throw a coat of SEM Landau Black if you want too. Sold

 

PM Sent regarding payment and shipping.

Thanks,

Tony K.

 

I just need the rear piece. If you want to seperate i will buy. I figured the labor to fix mine would constitute the purchase of another. Did you repair the headlight rings yourself? Mine both have broken pieces off them, i thought to just buy new from fusick because i have pieces missing. If you decide to sell let me know, and thanks for responding.

 

Where are you located? If you pick it up it might be worth it. Shipping that piece is very expensive, that's why it's more cost effective to sell the set

I have a restored driver's side headlight bucket for sale above

 

I am in southern ohio on the ohio river. How much do you want for the headlight bezel? How much do you think for shipping and the piece?Thanks

 

If you look above you'll see a picture of the one that's restored for $100 and the one that is not for $40. A ZIP would be really helpful for me to give you an accurate shipping cost.

 

I'm sorry i didnt give you the zip it is 45663. Thanks

 

Just wondering if you still have the door panels? I have a 68 convertable. Would they fit? Let me know.......Thanks, Brent

 

Have a glove box switch or mechanism that pops open glove box?

 

Sorry, for a 68 cutlass vert.

 

All 68's had vent windows that is why the non air cars dont have vents in the dash in 68. 69 hardtop and convt. non air cars had vents in the dash because they went away with the vent window, unless it was a post coupe, since all the post coupes still had vent windows.

 

Do you still have the dash pad? Please email me at toddvcarroll@hotmail.com

 

Do you have an antenna for a 69 conv.

 

I sent you an e-mail

 

Sorry, I don't