68 69 442/Cutlass parts for sale
#1
68 69 442/Cutlass parts for sale
Here's a list of parts I have for sale at the moment. All parts are used and sold as is. Prices do not include shipping. I am in the Seattle area. Most parts ship Fedex ground or thru U.S. Postal. I pack parts carefully, thanks for looking.
1) *SOLD*complete power window setup (no glass), from an Arizona 68 Cutlass convertible. Includes all regulators, wiring harness's and switches, nice dry stuff, $400.
2) *SOLD*rally pack tach & guages, plus floor shift 68 speedometer, all from a 68 442, pulled from a northwest car so the faces and housings have surface rust, broken wiring plug connector pin on the speedometer only, pins are all in place on the guage pod, $300 for the set of three.
3) *SOLD*original red 68/69 W30 inner fenderwell pair in rough to fair condition, could be used in a driver, would look decent with a re-dye, $250.
4) *SOLD*68 442 4-speed clutch linkage setup, complete from pedals to throwout bearing fork, it's all here but of course has wear at pivot points, good for a car being switched over from an automatic, $200 for the setup.
5) *SOLD*68 442 Hurst 4 speed shifter and rods, some rust on handle, **** is missing, probably all needs refurbishing, $50.
6) bellhousing and flywheel (late pattern 350-400-455), 1" piece missing from top of bellhousing, flywheel has rust (tranny shop says it is usable with a resurface), $120 for the set.
7) 68 bucket seats, need to be completely redone, tracks and frames have some rust but aren't destroyed beyond re-use, $175.
8) *SOLD*factory boxed rear control arms from 68 442, were sandblasted and bushings replaced years ago, in decent condition but need repainting again, $150.
9) 68 442 rear bumper w/ cutouts. Has dent near the middle, needs straightening/replating, it is a core with no rot-through, $125.
10) 68 442 only rear bumper brackets (correct, w/ tabs for tailpipe hangers), sandblasted and painted years ago, nice shape but need repainting again, $75.
11) *SOLD*68 442/Cutlass headlight housing pair, these are complete w/ all trim and are a good surviving set. Not blown apart, but do have some small cracks here and there and paint fade. Great set to restore for a nice car, $200.
12) *SOLD*1111468 Delco distributor from a 68 442. Correct for 68 442 with Turbo 400, and 68 W30 - auto or manual trans. Date code 7M5 - late 67 for early production 68 cars. Spins fine but is dirty, needs clean up. $150.
I'll be listing more parts as I get them rounded up and inspected for condition. I accept paypal & money orders, or cash in person, thanks.
1) *SOLD*complete power window setup (no glass), from an Arizona 68 Cutlass convertible. Includes all regulators, wiring harness's and switches, nice dry stuff, $400.
2) *SOLD*rally pack tach & guages, plus floor shift 68 speedometer, all from a 68 442, pulled from a northwest car so the faces and housings have surface rust, broken wiring plug connector pin on the speedometer only, pins are all in place on the guage pod, $300 for the set of three.
3) *SOLD*original red 68/69 W30 inner fenderwell pair in rough to fair condition, could be used in a driver, would look decent with a re-dye, $250.
4) *SOLD*68 442 4-speed clutch linkage setup, complete from pedals to throwout bearing fork, it's all here but of course has wear at pivot points, good for a car being switched over from an automatic, $200 for the setup.
5) *SOLD*68 442 Hurst 4 speed shifter and rods, some rust on handle, **** is missing, probably all needs refurbishing, $50.
6) bellhousing and flywheel (late pattern 350-400-455), 1" piece missing from top of bellhousing, flywheel has rust (tranny shop says it is usable with a resurface), $120 for the set.
7) 68 bucket seats, need to be completely redone, tracks and frames have some rust but aren't destroyed beyond re-use, $175.
8) *SOLD*factory boxed rear control arms from 68 442, were sandblasted and bushings replaced years ago, in decent condition but need repainting again, $150.
9) 68 442 rear bumper w/ cutouts. Has dent near the middle, needs straightening/replating, it is a core with no rot-through, $125.
10) 68 442 only rear bumper brackets (correct, w/ tabs for tailpipe hangers), sandblasted and painted years ago, nice shape but need repainting again, $75.
11) *SOLD*68 442/Cutlass headlight housing pair, these are complete w/ all trim and are a good surviving set. Not blown apart, but do have some small cracks here and there and paint fade. Great set to restore for a nice car, $200.
12) *SOLD*1111468 Delco distributor from a 68 442. Correct for 68 442 with Turbo 400, and 68 W30 - auto or manual trans. Date code 7M5 - late 67 for early production 68 cars. Spins fine but is dirty, needs clean up. $150.
I'll be listing more parts as I get them rounded up and inspected for condition. I accept paypal & money orders, or cash in person, thanks.
Last edited by 442mark; December 27th, 2012 at 06:16 AM. Reason: some parts sold / new parts added
#4
1968 442 parts
Do you still have the control arms and bumper brackets. And the rally pack.
Can you send me pictures.
thanks
bruce@serviceparexcellence.com
Can you send me pictures.
thanks
bruce@serviceparexcellence.com
#6
Do you still have the control arms and bumper brackets. And the rally pack.
Can you send me pictures.
thanks
bruce@serviceparexcellence.com
Can you send me pictures.
thanks
bruce@serviceparexcellence.com
#8
Thread
Thread Starter
Forum
Replies
Last Post
Oldssupreme
Parts For Sale
62
November 18th, 2013 03:10 AM
Oldssupreme
Parts For Sale
3
June 28th, 2013 08:20 AM