'67 Cutlass/442 Floor Shift Steering Column, Non-tilt and restored/highly detailed. $250 + shipping.

>Completely dismantled, degreased, cleaned, etc. Not pitted or hammered with rust before I started the process.

>Painted parts beadblasted to bare metal, prepped and primed/painted with PPG DP90 Epoxy

>NEW correct turn signal wiring harness....not a generic type that requires an jumper harness (cost $65)

>Upper column (the part you see coming out from the dash) is also in DP90. It can be wiped down, scuffed and painted to whatever interior color you have.

>Lots of nice detail on various parts, plating, natural steel finishes, black oxide, etc. This column would be at home in a concours type car if that's what you need.

>It'll need a new or nice used turn signal stalk.

>I've made a new vinyl "cover" that wraps around the expanded metal/mesh on the lower outer column.

Pics below. I can send more to anyone that's serious about the column.

 

You do nice work Patton.

 

TTT - Thanks

 

bump - possible delivery available at OCA Nats with prepayment.

 

Ttt

 

nice job,

 

I know this is an old thread but is this still available?