'67 "88" & "98" Column Shift Lever w/Tilt-NOS
#1
'67 "88" & "98" Column Shift Lever w/Tilt-NOS
The parts book describes this as "....with tilt steering column",
so, I'm not sure if this means that it also works on non-tilt columns or it works on tilt columns only.
Please confirm this will work for your application before purchasing.
This a nice piece with shiny chrome, but, has 2 very small imperfections.
On the very end of the chromed plastic handle, there is a pit about 1/16" in diameter.
Approx. 1" from the pivot hole where the lever inserts into the column,
the chrome has a very small area of pitting
in the bend of the lever. This faces toward the dash and would be difficult to see once installed.
Otherwise, this lever is what you would expect of an NOS part.
$20.00 plus shipping.
so, I'm not sure if this means that it also works on non-tilt columns or it works on tilt columns only.
Please confirm this will work for your application before purchasing.
This a nice piece with shiny chrome, but, has 2 very small imperfections.
On the very end of the chromed plastic handle, there is a pit about 1/16" in diameter.
Approx. 1" from the pivot hole where the lever inserts into the column,
the chrome has a very small area of pitting
in the bend of the lever. This faces toward the dash and would be difficult to see once installed.
Otherwise, this lever is what you would expect of an NOS part.
$20.00 plus shipping.
Last edited by 67442nut; December 13th, 2010 at 07:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
hvysupreme
Cutlass
5
February 18th, 2017 12:40 PM
glparker389
Parts Wanted
5
March 19th, 2014 04:46 PM
Rocketbrian
Parts Wanted
4
October 2nd, 2013 10:18 AM
Bitburger
Cutlass
3
December 30th, 2012 04:49 PM
ros6872
Parts Wanted
2
February 24th, 2010 05:50 PM