More parts I'll not use. There's one set of repop black and one set of repop white door panels. I believe these are PUI, but they both have wrinkles in the wood grain pattern so that would need to be repaired. Then a set of what I think are repop 1968 Chevelle pattern, but with the 1969 door lock position. So the Cutlass panels need work and fit 1969-72 Cutlass/442 hardtops. The Chevelle panels won't match anything, but if someone has a budget driver with shredded panels this will fit 69-72 and look decent. Since YearOne Prices are $225 a pair for new repop I'd like to have $75 a set plus shipping for these.

Then I've got a set of burgundy panels from a 1967 Olds 98 and pearl ones from a 1968 Delta Custom. These have water damage to the cardboard. If someone had a lot of time they might be able to replace the backing and clean up the fronts. Or... I can pull all the stainless trim and top metal piece then junk the rest. I can provide lots of pictures but am just putting a few up here for people to consider. $25 a pair plus shipping. John

PB132065.jpg

PB132066.jpg

PB132071.jpg

PB132072.jpg

PB132074.jpg

PB132079.jpg

 

Hi John.

Do you know if there is a way of repairing the wood grain? Also, do you if the white/pearl door panels are '71 or '72?

Thanks,
Anthony

 

Hello Anthony
Someone would have to experiment, to try and find something to replace the wood grain with. The white panels would work for both 71 & 72, but you'd have to check and see what yours look like. There are a couple different patterns in the vinyl.

 

PM sent

 

Hi John , I was also wondering about the wood grain on the 72 panel . I thought that was a sticker of some kind , but finding one to match would probably be impossible . I was also wondering if you have the drivers door panel too .

 

Yes, I think it is an adhesive backed material. I haven't taken the time to see if I could match the pattern. How does the wood grain portion look on your door panels? If the rest of your panels are bad maybe you could cut out that portion to install on these? come to think of it, I may have a set of panels with speaker holes cut in them. If your up for a challenge, I might be able to provide a set of panels to cut up and try to fix these. I do have pairs for all of them, I've been posting so many pictures lately I thought I'd post just one at first. If you'd send me a PM with your email address I'll send you more photos. Were you interested in the black or white ones?

John

 

Hi , It looks like the side panel with the white/beige color (hard to tell) , with the wrinkled wood grain would be the one that looks like mine . I would need the driver side one though . Mine has a small rip that extends past the round plastic spacer under the window crank , so that's why I was interested in that one . I will send you my email like you suggested later today .


I also was wondering if you have any arm rests that go on the door panels . ( mine are disintegrated. )

 

John just to let you know tubes went out Wed - Dean

 

Are the pearl ones sold? I have a pair of year one repops, but not the top rail to install them, willing to buy the rails for asking price and you keep the panels. Thanks

 

Thanks Dean!

OIF2010, are you needing the metal piece that the panel glues onto, that the window felt is attached to? I may have some bad panels with those still usable.

John

 

If you do shoot me the price for a pair and some payment info, I want these asap!!!

 

I've got a pair for you. If you would send me a PM or email with your address I'll get a price including shipping for you.

John

 

Pm sent!