Parts For Sale Please read forum guidelines before posting.

1967 Olds Cutlass parts.

Thread Tools
 
Search this Thread
 
Old September 28th, 2015 | 04:44 PM
  #1  
SnakeBit's Avatar
Thread Starter
Car Whisperer
 
Joined: Feb 2013
Posts: 260
From: Florida
1967 Olds Cutlass parts.

with the LS swap looming in the air, going to have a few parts. the car has a 330 2 brl in it. the carb is a reman that has probably 25 miles on it. I put in an HEI distributor with accel wires that has the same mileage on it. car is a 2 speed powerglide. I have the original air cleaner for the car, but it doesn't fit with the HEI distributor so have a chrome air cleaner on it with an adapter to fit the neck properly. if there is anything off the drivetrain that anyone is interested in, please let me know. not looking to get rich, just help out someone who might want or need some of this stuff. I also have the original 14" hubcaps.
Old September 28th, 2015 | 04:49 PM
  #2  
Gmcdually's Avatar
Registered User
 
Joined: Jan 2015
Posts: 412
From: Southport NC
Cutlass

i am looking for a complete running motor for my 67 . Could you pm me
with price . Thanks Ken
Old September 28th, 2015 | 04:54 PM
  #3  
SnakeBit's Avatar
Thread Starter
Car Whisperer
 
Joined: Feb 2013
Posts: 260
From: Florida
this motor needs to be rebuilt. it runs, but makes noise, burns oil on the driver side that indicates rings and or valve seals. I think the noise is a lifter, but not sure. not something I would sell to someone to put in their car and drive away. if you are still interested I can give you a cheap price. probably the shipping would be the issue in price. thanx for asking.
Old October 19th, 2015 | 04:17 PM
  #4  
SnakeBit's Avatar
Thread Starter
Car Whisperer
 
Joined: Feb 2013
Posts: 260
From: Florida
motor and trans (powerglide 375b) are out. have the front accessories...oem power steering pump, a/c compressor; alternator (?) or generator..whatever that is on there, aftermarket air cleaner; oem air cleaner; HEI distributor and accel wires; oem steering box; gas pedal assembly. let me know what you might need from the drivetrain and accessories. trans shifted fine when removed. 4 oem 14" hubcaps.

Last edited by SnakeBit; October 20th, 2015 at 05:45 PM.
Old October 20th, 2015 | 01:01 PM
  #5  
66 Olznut's Avatar
Ca's Only Official OLZNUT
 
Joined: Mar 2007
Posts: 510
From: Sunny So Cal
Do you have the choke pipe that comes out of the manifold and goes to the choke, not the long one that goes to the rear of the carb? What about the round black choke part itself? Please email me at olznut@aol.com Thanks!
Old October 20th, 2015 | 05:08 PM
  #6  
wishbone204's Avatar
Registered User
 
Joined: Apr 2014
Posts: 9
Originally Posted by Gmcdually
i am looking for a complete running motor for my 67 . Could you pm me
with price . Thanks Ken
I have a 350 out of a 68 if your interested has just been freshen up. I was going to use it in my 67 but found a 400 to use.
Old October 20th, 2015 | 05:45 PM
  #7  
SnakeBit's Avatar
Thread Starter
Car Whisperer
 
Joined: Feb 2013
Posts: 260
From: Florida
Originally Posted by 66 Olznut
Do you have the choke pipe that comes out of the manifold and goes to the choke, not the long one that goes to the rear of the carb? What about the round black choke part itself? Please email me at olznut@aol.com Thanks!
honestly don't recall. will go by the shop and see what is there. should be there. nothing has been modified by us.
Old October 20th, 2015 | 06:09 PM
  #8  
66 Olznut's Avatar
Ca's Only Official OLZNUT
 
Joined: Mar 2007
Posts: 510
From: Sunny So Cal
Thanks, doesn't have to be show condition or anything, just want it to work.
Old October 22nd, 2015 | 01:53 PM
  #9  
SnakeBit's Avatar
Thread Starter
Car Whisperer
 
Joined: Feb 2013
Posts: 260
From: Florida
ok, will let you know when I check it the next time I go. thanx.
Old October 23rd, 2015 | 02:47 PM
  #10  
SnakeBit's Avatar
Thread Starter
Car Whisperer
 
Joined: Feb 2013
Posts: 260
From: Florida
the choke part is part of the reman carb I just bought for the car. will want to sell the carb complete. I didn't see the tube, will have to look around their shop and see if I can find it. they were busy today so didn't get to look much.
Old October 23rd, 2015 | 03:35 PM
  #11  
66 Olznut's Avatar
Ca's Only Official OLZNUT
 
Joined: Mar 2007
Posts: 510
From: Sunny So Cal
Thanks for checking anyways.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dz442
Parts For Sale
1
June 14th, 2013 08:21 PM
1k442
Parts For Sale
11
May 13th, 2013 01:03 PM
vpugly
Parts For Sale
3
October 25th, 2012 06:40 PM
1k442
Parts For Sale
0
December 28th, 2011 12:44 PM
1k442
Parts For Sale
0
October 13th, 2011 01:09 PM




All times are GMT -7. The time now is 09:20 PM.