hello....everyone...have some very nice olds parts for 1966 and 1967 cutlasses and 442's for hardtops/convertibles, 4 doors and vista cruisers/station wagons...extermely nice sets of doors, trunk lids and front inners fenders...nice 1968 cutlass, 442, vista cruiser core support..lots of trims pieces, glass/door hardware..etc..please call 618-282-6560 for your specifis needs..PLEASE LEAVE A MESSAGE ..and i will get back to you asap...thanks..!

 

Im looking for a steering wheel, in driver condition. Please let me know if you have one. Thanks
Mike Davis

 

good morning mike...all i have that is good is a 66 f85 standard wheel which is in very nice condition..no cracks, etc...wheel and nice horn cap..$100.00...i am located in ruma, illinois..zip code 62278...thanks!

 

Do you have an AM or AM/FM radio for a 66? It does not need to be working - I also need the black radio faceplate parts for the dash. Please send a picture if you have - thanks.

Ray S.
rspreen1@comcast.net

 

I am interested in any good Instrument Panels.
Thanks in advance
Ron Roth
586-556-1234
Orion Township Michigan
30 Miles North of the Murder City

 

good morning and happy easter!...i have several 66 am radios and faceplates...i will have to look today to see how nice the front chrome bezels are..i believe i have at least two that are very nice..will get back to you later this morning..kim

 

good morning again..yes i have a very nice 66 am radio (i do not know if it works) assume it doesn't..by very nice i mean pit free very nice chrome and the station indicator travels by the turn of the ****..no rust on the radio case..$50.00...as to the faceplate i admit i was thinking of the a/c block off plate..i have extra dash pieces tht you could cut out the factory molded radio area..but thats all i have..please let me know if i can be of further help..if you purchase the radio i will include the plastic dash repair panel at no cost..so the price would be $50.00 plus actual shipping cost...take care...kim

 

i have six panels....4 of them have the typical hair line crack above the speaker...one of them has a hairline crack above the gas guage as well as above the speaker..one of them has no cracks but someone drilled a #10 size screw hole on the horizontal shelf above the speaker...if you have any further interest please let me know..happy easter!...kim

 

Kim - I would like the radio and dash pieces please - would you do it for $50 including shipping? Do you take Pay Pal, Visa or a check? Also, do you have the 2 bottom trim pieces for a '66 bucket seat (1 only)? Thanks - for shipping, my home address is:

Ray Spreen
4970 Willow St
Bellaire, TX. 77401

 

hello ray..sorry, but got to get 50.00 plus shipping..the trim pieces you are talking about..are these the two pieces that wrap around the bottom of the seat?..about a foot long and curl around the front?..if so i have a matching pair..new ones sell for about 75.00.. i will sell mine for 40.00..please let me know if you are wanting these pieces as well..so i can pack everything up and take the package to the ups store (monday) and get a quote for shipping cost..thanks very much..hope you had a nice easter...kim..p.s.... i do have paypal.

 

Kim - that is fine - the radio, dash panels and seat bottoms for a total of $90 plus shipping. Let me know total and send me your Pay Pal ID to my email rspreen1@comcast.net . Thanks, Ray

 

hi there i need the 2 quarter window window felts (in OK shape?)
i need a steering wheel nut & turn signal cam
and if you have decent back seat arm rests

all for a 66 2 door hard top, shipping to 48316 Michigan!
PM me details, thank you & Happy Easter!

 

hello..i have a sterring wheel nut, turn signal canc. cam (for 66 non tilt) and a pair of very good rear seat arm rests for 66-67 cutlass 2 door hardtop ..sorry no decent widow felts...$120.00 plus shipping for what i do have..the arm rests i have are very hard to find in such nice condition. please let me know if this meets with your approval and i will box up and get a shipping quote...thanks..kim

 

I would be interested in a 67 Tach dash if you have an extra

 

Hi, Looking for a nice left front inner fender (wheelhouse), and the R/R stainless trim on the dog leg. Anything?
Thanks,
Paul

 

looking for the a/c condenser mounting bolts(with rubber in the middle).

bill

 

hello paul...i only have a 66 mint condition inner fender (no dimple for the large master cylinder booster offered in 67)..my inventory of 67 trim is not completely gone..sorry..have a great day!..kim

 

Hi Kim,
I don't have PB in either car, and I'm not planning on making them Concourse, so it could work for me. What kind of balloons are you talking (you can PM me if you wish)?


"my inventory of 67 trim is not completely gone"
I'm not sure what this means. To be clearer, I need the small piece that is in front of the wheel opening molding that connects to the larger piece that goes from the whhel opening forward towards the door. Kind of L shaped.

Thanks,
Paul

 

i need a drivers side lower control arm, just took mine off and the back hole is wollered out some and the inner lip for the bushing is cracked. Need a good one. Does anyone know if the repos are any good? is the metal the same thickness?
Where are you located, Im in central Texas 77861

 

good morning..i have one...included is a new lower ball joint..bushings will need replaced...$60.00 plus shipping...have a great day ..kim..you can contact me direct at sixtiesclassics@live.com i am located in southern illinois.

 

starter wiring from juntion to starter with good (factory tar type) insulation ?

 

good moning ..i have one..please send me your email address and i will send you a picture today..you can contact me directly at.... sixtiesclassics@live.com thanks..kim

 

[QUOTE=goldie442;533897]good moning ..i have one..please send me your email address and i will send you a picture today..you can contact me directly at.... sixtiesclassics@line.com thanks..kim[/QUOTE



?????????Yesterday your email was sixtiesclassics@live.com Did it change from live to line?

Henry

 

hello...previous reply i typed wrong email address..below is the correct address..thanks..kim