1964 Cutlass sheet metal
#1
1964 Cutlass sheet metal
Hi All
I hate to throw anything away that might be usable. So I've managed to clutter up the place with bits and pieces. Time to thin it out a bit. I've got three firewalls including dash areas that I removed from 1964 Cutlass's. Two hardtop one convertible. They all have rust in the windshield channel, one really bad, one may be fixable. I'm thinking its more likely someone would want the ends where the door attaches and it bolts down to the frame. Not sure the exact name for that. But I'll sell the complete firewall for $100 plus shipping, or I'll cut and ship just the parts you want for that price. In addition, if you just want one end I'll cut that off and sell that part for $50 plus shipping. I've also got portions of the convertible rocker panels. They have an extra piece of metal inside to stiffen it. I have the passengerside quarter panel from the convertible. It has bondo from dents but not rot holes in it. I'd want $250 for that. Again, if you don't want to pay for shipping the whole panel I'll cut and ship just what you want to save on shipping. I've got some other pieces that I'll add to this thread later. Parts are located in Medford Oregon. If your close enough to pick parts up your welcome to come see things in person before committing to purchase. Also have a 1965 frame that came out of a car with the 3 speed manual transmission. It has the same features that the 442 frame had. I'd like $500 for that frame.
I hate to throw anything away that might be usable. So I've managed to clutter up the place with bits and pieces. Time to thin it out a bit. I've got three firewalls including dash areas that I removed from 1964 Cutlass's. Two hardtop one convertible. They all have rust in the windshield channel, one really bad, one may be fixable. I'm thinking its more likely someone would want the ends where the door attaches and it bolts down to the frame. Not sure the exact name for that. But I'll sell the complete firewall for $100 plus shipping, or I'll cut and ship just the parts you want for that price. In addition, if you just want one end I'll cut that off and sell that part for $50 plus shipping. I've also got portions of the convertible rocker panels. They have an extra piece of metal inside to stiffen it. I have the passengerside quarter panel from the convertible. It has bondo from dents but not rot holes in it. I'd want $250 for that. Again, if you don't want to pay for shipping the whole panel I'll cut and ship just what you want to save on shipping. I've got some other pieces that I'll add to this thread later. Parts are located in Medford Oregon. If your close enough to pick parts up your welcome to come see things in person before committing to purchase. Also have a 1965 frame that came out of a car with the 3 speed manual transmission. It has the same features that the 442 frame had. I'd like $500 for that frame.
#4
I have someone needing the lower portion behind the wheel well. I hesitate to cut up the panel. Is there anyone out there wanting just the wheel opening? I'd be willing to cut it and sell individual pieces which would be much cheaper to ship if there's interest in that route. I also have a set of doors from a 1964 hardtop car. Then a set of 1965 post doors with dents but no rot. I'll update with photos later this weekend.
#7
Thread
Thread Starter
Forum
Replies
Last Post
2blu442
Parts For Sale
6
January 27th, 2018 08:00 AM