10 bolt 8.5 cutlass f85 rear A-body GM 3.42 and 3.90
Thread Starter
Registered User
Joined: Jul 2006
Posts: 1,826
From: Richfield, Oh
10 bolt 8.5 cutlass f85 rear A-body GM 3.42 and 3.90
10 bolt 8.5 (large ten bolt rear) for GM 68-72 A-Body
I have 2 10 bolt 8.5 rears built ready to go!
1.) 3.42 with factory posi super clean housing
2.) 3.90 with eaton posi very clean housing
1.) rear specs $1099.00
-NEW 3.90 Yukon Performance ring and pinion
-NEW Eaton performance clutch type posi 400# preload springs
-NEW complete bearing kit.
-Bolt in axle retention
-All set-up ready for summer drag racing or burn out cruising fun. Probably better for OVER DRIVE tranny set-up
-Housing is very clean media blasted primed and painted chassis black.
-comes with GM backing plates for drum brakes (9"
2.) rear specs $959.00
-NEW 3.42 Yukon Performance brand ring and pinion
-Reconditioned GM factory posi unit
-New Bearing set installed
-Bolt in axle retention
-All set-up ready for all around performance application, GREATFOR 350TH OR 400TH TRANNY SET-UPS.
-Housing is SUPER CLEAN almost show quality with backing plates included.
Shipping- need a zip code to figure shipping to a commercial address as this will keep you price down and reasonable...
I have 2 10 bolt 8.5 rears built ready to go!
1.) 3.42 with factory posi super clean housing
2.) 3.90 with eaton posi very clean housing
1.) rear specs $1099.00
-NEW 3.90 Yukon Performance ring and pinion
-NEW Eaton performance clutch type posi 400# preload springs
-NEW complete bearing kit.
-Bolt in axle retention
-All set-up ready for summer drag racing or burn out cruising fun. Probably better for OVER DRIVE tranny set-up
-Housing is very clean media blasted primed and painted chassis black.
-comes with GM backing plates for drum brakes (9"
2.) rear specs $959.00
-NEW 3.42 Yukon Performance brand ring and pinion
-Reconditioned GM factory posi unit
-New Bearing set installed
-Bolt in axle retention
-All set-up ready for all around performance application, GREATFOR 350TH OR 400TH TRANNY SET-UPS.
-Housing is SUPER CLEAN almost show quality with backing plates included.
Shipping- need a zip code to figure shipping to a commercial address as this will keep you price down and reasonable...
Last edited by monzaz; Jun 2, 2009 at 05:56 AM.
Registered User
Joined: Feb 2009
Posts: 157
From: Houston, Texas
10 bolt 8.5 (large ten bolt rear) for GM 68-72 A-Body
I have 2 10 bolt 8.5 rears built ready to go!
1.) 3.42 with factory posi super clean housing
2.) rear specs $959.00
-NEW 3.42 Yukon Performance brand ring and pinion
-Reconditioned GM factory posi unit
-New Bearing set installed
-Bolt in axle retention
-All set-up ready for all around performance application, GREATFOR 350TH OR 400TH TRANNY SET-UPS.
-Housing is SUPER CLEAN almost show quality with backing plates included.
Shipping- need a zip code to figure shipping to a commercial address as this will keep you price down and reasonable...
I have 2 10 bolt 8.5 rears built ready to go!
1.) 3.42 with factory posi super clean housing
2.) rear specs $959.00
-NEW 3.42 Yukon Performance brand ring and pinion
-Reconditioned GM factory posi unit
-New Bearing set installed
-Bolt in axle retention
-All set-up ready for all around performance application, GREATFOR 350TH OR 400TH TRANNY SET-UPS.
-Housing is SUPER CLEAN almost show quality with backing plates included.
Shipping- need a zip code to figure shipping to a commercial address as this will keep you price down and reasonable...
Registered User
Joined: Oct 2009
Posts: 22
From: Detoit Mi
10 bolt 8.5 cutlass f85 rear A-body GM 3.42 and 3.90
Hey, i know its been a while since this post, but i seen by the pic you had a couple. I have a 72 cutlass and looking for 8.5 10 bolt 3.42 as a min. more like a 3.73 or 3.90 4.11. Please let me know what you have avail.
Thanks,
Brandon
Thanks,
Brandon
10 bolt 8.5 (large ten bolt rear) for GM 68-72 A-Body
I have 2 10 bolt 8.5 rears built ready to go!
1.) 3.42 with factory posi super clean housing
2.) 3.90 with eaton posi very clean housing
1.) rear specs $1099.00
-NEW 3.90 Yukon Performance ring and pinion
-NEW Eaton performance clutch type posi 400# preload springs
-NEW complete bearing kit.
-Bolt in axle retention
-All set-up ready for summer drag racing or burn out cruising fun. Probably better for OVER DRIVE tranny set-up
-Housing is very clean media blasted primed and painted chassis black.
-comes with GM backing plates for drum brakes (9"
2.) rear specs $959.00
-NEW 3.42 Yukon Performance brand ring and pinion
-Reconditioned GM factory posi unit
-New Bearing set installed
-Bolt in axle retention
-All set-up ready for all around performance application, GREATFOR 350TH OR 400TH TRANNY SET-UPS.
-Housing is SUPER CLEAN almost show quality with backing plates included.
Shipping- need a zip code to figure shipping to a commercial address as this will keep you price down and reasonable...
I have 2 10 bolt 8.5 rears built ready to go!
1.) 3.42 with factory posi super clean housing
2.) 3.90 with eaton posi very clean housing
1.) rear specs $1099.00
-NEW 3.90 Yukon Performance ring and pinion
-NEW Eaton performance clutch type posi 400# preload springs
-NEW complete bearing kit.
-Bolt in axle retention
-All set-up ready for summer drag racing or burn out cruising fun. Probably better for OVER DRIVE tranny set-up
-Housing is very clean media blasted primed and painted chassis black.
-comes with GM backing plates for drum brakes (9"
2.) rear specs $959.00
-NEW 3.42 Yukon Performance brand ring and pinion
-Reconditioned GM factory posi unit
-New Bearing set installed
-Bolt in axle retention
-All set-up ready for all around performance application, GREATFOR 350TH OR 400TH TRANNY SET-UPS.
-Housing is SUPER CLEAN almost show quality with backing plates included.
Shipping- need a zip code to figure shipping to a commercial address as this will keep you price down and reasonable...
Thread
Thread Starter
Forum
Replies
Last Post
nj_cutlass72
Parts For Sale
4
Nov 20, 2019 09:11 PM
GlennLever
Chassis/Body/Frame
17
Aug 28, 2015 03:02 PM
monzaz
Parts For Sale
0
Sep 11, 2012 08:27 PM
