My first ever project car!
Thread Starter
Registered User
Joined: Apr 2015
Posts: 1
From: Albuquerque, NM
My first ever project car!
Hi everybody! Just picked up my first old American car, a '73 Olds Omega. I understand that parts and such may be harder to come by as the omega is more obscure that say, a cutlass. The first thing I need to know is how to adjust the idle mixture properly. Its a rocket 350 with a rochester 2jet carb. Do i need a special tool or device I'll need for this? Thank you, and please go easy on me. I am a noob.
-Mike
-Mike
Administrator
Joined: Oct 2009
Posts: 42,448
From: Poteau, Ok
Welcome to the site, congrats on your new to you project. All you need is a tach or vacuum gauge to adjust the carb. Adjust for the highest vacuum or RPM, keep the mixture screws an even number of turns out.
Old(s) Fart
Joined: Mar 2007
Posts: 50,699
From: Northern VA
Welcome. Your Omega is essentially a Nova with a different grille, so most parts are even easier to get than for a Cutlass. The first special "tool" you need to get is a factory Chassis Service Manual, which will detail the carb adjustment process as well as all other repair and maintenance instructions. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
kartmaster
Transmission and Driveline
23
Sep 14, 2012 12:55 PM
