Installing 67 Olds Cutlass Oil Pressure Sensor
Thread Starter
Registered User
Joined: Mar 2014
Posts: 5
Installing 67 Olds Cutlass Oil Pressure Sensor
I'm converting my 67 Cutlass to Rally Pack Guages. Engine and dash wire harness for Rally Guages installed. Car has P/W Steering and A/C so alternator sets above oil sensor. Added 45 degree elbow from Fusick to oil sensor but alternator hits sensor. AIM shows sensor located in a clamp attached to P/W Steering bracket with oil line runing from engine block sensor hole but don't know if this was actually done. All I know is it is not going to work the way I've installed it. Any suggestions would be appreciated. I would like to hear from someone who has a 67 Cutlass with Rally Pack Guages that has both power brakes and air conditioning and let me know how the oil sensor is installed. Thanks.
Last edited by Warren44; Nov 14, 2018 at 09:07 AM. Reason: Added more information
Registered User
Joined: Sep 2009
Posts: 337
From: Austin, TX
I switched to Vintage Air, but with the Fusick extension I had plenty of room.
https://app.box.com/s/svwnem2rm8vrtkwqtgzemxxg73us6y72
Tim
https://app.box.com/s/svwnem2rm8vrtkwqtgzemxxg73us6y72
Tim
Thread
Thread Starter
Forum
Replies
Last Post
