55 Olds Throttle Control Diagram
55 Olds Throttle Control Diagram
I'm in need of the diagram for the throttle control with part #'s for a 55 Olds 4 BBL set up on a 324. I'm trying to convert from 2 BBL to 4 BBL and there are some small differences I'd like to confirm so I can round up the correct parts. A good resolution picture would be helpful. If anyone has a 55 Olds 4 BBL linkage set up they would let go of I'd appreciate a reply also.
The closest I could find is one for a 1956 Oldsmobile. It is similar to the 1955. I made the conversion you desire many years ago. I did it using a donor car. You didn't say which transmission you have. The linkage is different depending on the transmission. I assumed the Hydramatic. If originality is desired use the 1955 4GC carburetor. If you'd prefer the "improved" version, get the 4GC from a 1956. It's a direct bolt on. It has the auxiliary throttle valve assembly on the secondaries where the 1955 doesn't. Anything newer than 1956 has different bore sizes.
John I'd be happy to get the linkage from you. Looks complete. Kinda stuck without it. I have the carb and manifold ready to go. How much would you like? Zip is 98382.
Ozzie, there is one item on the 56 linkage diagram (Bellcrank to throttle auxiliary B/crank) which is part #564737 on a 55 but isn't on a 56. Not sure how important that is so the reason for the 55 linkage request.
Transmission is a hydramatic.
Ozzie, there is one item on the 56 linkage diagram (Bellcrank to throttle auxiliary B/crank) which is part #564737 on a 55 but isn't on a 56. Not sure how important that is so the reason for the 55 linkage request.
Transmission is a hydramatic.
Last edited by 55Rocketeer; Dec 31, 2014 at 10:00 AM. Reason: Added info
Linkage
Thanks to 2blu442 (John) for the complete 55 linkage set up. Will clean up nicely. I found the diagram for the linkage arrangement in a copy of the Hydra-Matic manual courtesy of my friend Don.
Yes and the base 88 came with the 55 hydramatic tranny some prefer 55 hydramatic not
Last edited by Robcanal1956; Oct 5, 2025 at 03:16 PM. Reason: Did not finish text
Thread
Thread Starter
Forum
Replies
Last Post



