Anyone ever buy these and if so are they worth the money?

http://www.gregsonline.com/eshop/Int...ge/SPOL176.htm

http://www.faxonautoliterature.com/%...ls-P10912.aspx

http://www.faxonautoliterature.com/1...al-P12236.aspx

 

I will sell you the two book set I bought from Ebay.
They are not a great book by any means. There is a lot of incorrect information I have found in it.
Not trying to bash them too bad though, there is some good information in them too, but not a depedable book really.
Here is a link to what I have.
http://cgi.ebay.ca/1964-1972-442-Cut...als_Literature
The ones you show are the same book in the first two links.
I have no knowledge of the Hollander manual you show in the third link, but from what I've heard, the Hollander manuals are a good source.
$20 for my set. Still like new.
Duane

 

The Hollander Interchange Manual is (or at least, used to be) the wrecking yard bible. I've got a set that I bought decades ago that covers 1964-74. One word of caution is that the Hollander Manual is conservative - it only lists exact interchanges and the data has been compiled by trial and error, not some scientific, factory-sponsored method. As a result, it is not completely correct, but again, it errs on the side of conservatism. For example, the Hollander Manual shows that only Cutlass disk spindles interchange with other Cutlass disk spindles for 67-72. We know from much firsthand experience that ALL A-body disk spindles interchange in those years.

 

Good information as always Joe!!

Thanks

 

I have a hollander interchange manual for 1954 to 1966 if you need anything I can look it up for you.

Rene