General Discussion Discuss your Oldsmobile or other car-related topics.

Edelbrock 065 dual quad setup

Thread Tools
 
Search this Thread
 
Old Apr 13, 2019 | 06:55 AM
  #1  
classicmuscle442's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 1,413
From: Water Wonderland MI.
Edelbrock 065 dual quad setup

Need to figure out a fair price for complete setup with 065 Edelbrock intake, Edelbrock carb's, air cleaner, linkage, carb fuel line. Set up is on my '65 442 400 engine in running condition. Has manual choke setup and has progressive linkage. Member here is interested and would like it to be fair deal for both of us.
Old Apr 13, 2019 | 04:45 PM
  #2  
classicmuscle442's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 1,413
From: Water Wonderland MI.

Larger picture
Old Apr 13, 2019 | 09:00 PM
  #3  
OLDSter Ralph's Avatar
Registered User
 
Joined: Sep 2017
Posts: 5,171
From: St. Paul Minnesota
That's a nice set up.
Old Apr 14, 2019 | 06:33 AM
  #4  
joe_padavano's Avatar
Old(s) Fart
 
Joined: Mar 2007
Posts: 50,539
From: Northern VA
The bare intake sells in the $150-$250 range. That's a data point. You'll have to figure out what the rest of the setup is worth to you.
Old Apr 14, 2019 | 09:33 AM
  #5  
OLDSter Ralph's Avatar
Registered User
 
Joined: Sep 2017
Posts: 5,171
From: St. Paul Minnesota
Originally Posted by joe_padavano
The bare intake sells in the $150-$250 range. That's a data point. You'll have to figure out what the rest of the setup is worth to you.
Joe, on Ebay ? Are they available new ?
Old Apr 14, 2019 | 09:49 AM
  #6  
joe_padavano's Avatar
Old(s) Fart
 
Joined: Mar 2007
Posts: 50,539
From: Northern VA
Originally Posted by OLDSter Ralph
Joe, on Ebay ? Are they available new ?
That's the typical used price on ebay. I paid something like $165 for the one I have. The 065 has unfortunately been out of production for decades. And before someone posts about the Offy intakes, while still available new those are single plane and not the best-flowing designs. I ran one of these E-brocks on a 455 in a 71 Cutlass years ago with dual 500 CFM AFB carbs and progressive linkage. It was a very streetable setup.
Old Apr 14, 2019 | 10:04 AM
  #7  
classicmuscle442's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 1,413
From: Water Wonderland MI.
Thanks for the reply Joe, see there is one Edelbrock 065 listed with old carb's for 600. Lot of the offy's but not the best for torque. Selling the complete setup along with HEI distributor, basically turn key once installed.
Old Sep 1, 2019 | 08:14 PM
  #8  
peter8435's Avatar
1964 Cutlass convertable
 
Joined: Sep 2019
Posts: 17
I have been looking for one of these, if there is a chance of it still being avail. I will take it.
Old Feb 21, 2020 | 08:30 PM
  #9  
peter8435's Avatar
1964 Cutlass convertable
 
Joined: Sep 2019
Posts: 17
do you still have this? i am still looking
Old Feb 22, 2020 | 05:44 PM
  #10  
classicmuscle442's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 1,413
From: Water Wonderland MI.
Originally Posted by peter8435
do you still have this? i am still looking
Yes i still have it, original guy never followed thru, installing the '66 Tri carb setup.

Last edited by classicmuscle442; Feb 22, 2020 at 05:46 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
snotrocket71
Parts Wanted
4
Sep 12, 2018 02:27 AM
rptw32
Parts Wanted
0
Aug 10, 2016 10:44 AM
f-85
General Discussion
5
Mar 1, 2013 02:41 AM
JOE CAPP
Parts Wanted
1
Sep 10, 2012 12:32 PM
RAMBOW
Parts Wanted
0
Feb 12, 2012 09:12 PM




All times are GMT -7. The time now is 09:24 PM.