Hi i am new and wanted to get feedback.
Let me tell you I have a 1967 that had no paperwork buildsheet and not an origional motor. I broke the rear and threw it out and replaced it so I have no info on that "My mistake" but i am trying to mend my ways.
I attached a pic of my cowl Tag
I have researched and found this out.

Below is what I think i have figured out.
Am i on the right track?

Oh other picks are of an engine I scored for $500.
I think it is correct and in line for my build date of O6B because 114 is on stamped near the distributor. Julian for April 26 1967 = 6 weeks prior to build of car "Second Week of June"

General MotorsCorporation06BBuilt Second Week of JuneDST67196733817Hard Top Holiday CoupeLANLansing29554Production NumberTRDo I have this in car970Bucket SeatsYESP Passinger Seat ReclinesYESP-PPewter-PewterYESESoft Ray Tinted GlassYESTPontiac indicates Drivers Seat Is PowerYES ??2Colum 2EACYESGCenter ConsoleYESTRear Power AntennaYESRRear SpeakerYES3Colum 3BRear Window DefogerYES4Colum 4FOutside Remote MirrorYES5Colum 5V442YESYDelux front seat beltsYESTilt wheel.Cruise Control.Rear Window defoggerHi capacitor discharge ignitionTic,Toc,TAC GagesBoxed lower control armsFront sway barLoovered HoodRed tail lights BkUp in bumperCorrect grill and headlight trim


I hope i am posting in the right area.
Sorry post is so long.
Thanks for any feedback

 

Sorry for font messup I attached it in a pic

 

 

Looks like you may have scored a highly optioned
442. Nice. Do you have the 400 E-block as well?
the tic-tock-tac in those is worth a pretty penny
by itself. good luck with the project and welcome.

 

but a buildable block time perion correct. nothing i am trying to pass off as all origional but it will be fun. and a long road it is rough has been sitting for 12 years now. it is time to do it or it rusts away to nothing.
did any of the pics get through??

 

I think i did it

 

Yep now we can see picts, nice score on the engine, I woul not worry about originality with it only correctness which it is. Mechanicals wear out and need replacement... now post picts of the car!

 

That will have to be another day soon. I lost old picks on old computer. It is darkout now so i can't take any.I have most of it in the basement in boxes. It is stripped and off the frame. I have the frame in black emeron about 10 years old now. The shell is getting that glossy rust look. I get sick when i see it but have been very itchy to get going again on it. I love this sight i have been getting charged up just looking stuf up and reading other posts. cool stuff now to roll up the sleves and start something. thanks.

 

Did you catch the name of the attached picture? Oh well beauty is in the eye of the beholder. She is abused but i will take care of her.

 

Wow! Great car! I wish you the best in getting it all back together. It'll be well worth the effort to get her as correct as possible.

 

^^^X2!
That will be a fine ride with enough $$$!

 

Now that's a project, how many of the parts were included.

 

I had all but, no origional 400 "found a 67 400 to build" had no AC, no Cruise, under hood no origional radio, UHV ignition was there but disabled, "probably not working" Power rear antenna was not working. Sad thing was it was running fine! Took it apart with good intentions got it all apart, Me and the wife blasted the frame, got it in prime then black emeron, and lost the access to the garage I was doing the work at. I brought it to someone and it sat there for 16 months, got frustrated and towed it home and parts are in cellar now. I figure I have to move on this before it is too late. Love this sight it just gets me fired up when i am posting and reading.

 

Great project, worthy. 5V body tag says real 442. UHV system is pretty rare, and I have some experience with and parts for that. Huge factory blueprint of the UHV amplifier and hookups. Sounds like you need a proper 12-bolt for it.

 

I posted a question on another thread but seeing you mention it----
What rear end would the factory have installed?
1967 442
3 speed auto on center console.
Has AC
10 or 12 bolt?
Posi?
gears?

 

Probably Type O 12 bolt cover or Type P ten bolt cover
both have 10 bolts on the ring gear
posi and ratio were options