Found 2 4 doors & one coupe. All are pretty well picked over or junk, should have got more pix, sorry. The coupe has the entire dash in it including radio & AC parts & the engine. Front seat still has plastic on it but the vinyl underneath it is not perfect. Going back tomorrow to buy a '75 Cutlass, let me know if you need anything.
Scott

 

any steering wheels?

 

Sorry, no wheels or columns.

 

Body moldings like rocker moldings?

 

One of them, I think a 4 door, had a bunch of moldings & trim in the trunk. I'll try to get more pix & prices tomorrow. One has the grill with the individual OLDSMOBILE letters. I started to pull them for wall art but noticed one O & a L were were missing already.

 

I could use one stupid glove box latch (attached by 2 phillips screws) and a breather tube/ canister assembly off that 394 located on the rear of the engine

 

I don't know where he would be on pricing but I have a friend that would really like to have that 4 groove crankshaft pulley, the 2 groove generator pulley and if by chance the 4 groove water pump pulley is laying on the ground, get it. If the AC vents come out of the dash and are not too much trouble to pull, he probably would like to have those.

 

I heard from my buddy with the 59 late last night. He is not interested in the AC dash outlets. He is interested in the pulleys and the speedo. If they have some decent taillights he would be interested in a pair of lenses.

Thanks

 

59,
I pulled the latch out of one of them today. I also pulled the cap/breather off one of the engines, is this what you need? If so $5.00 for the latch & $15.00 for the cap? Plus shipping?
IMG_20150812_165821_880_zpse11e40e2.jpg

Red,
I pulled the speedo, man what a patience tester that was!! $50.00??? I pulled the AC vents also to put on ebay probably. I found one good lens with just some minor stress cracks in it. $20.00?? Plus shipping on all.
IMG_20150812_165832_595_zps24a9f963.jpg

IMG_20150812_162902_649_zps15d5cdac.jpg

IMG_20150812_162910_933_zps450b5764.jpg

 

Lots of good trim in one of the 4 door cars. Must be dang near 100 pieces of trim on a 4 door!! Glad I don't have to polish them.

One of the cars has a power bench seat in it, anyone interested?
IMG_20150812_101539_436_zps07cf2da9.jpg
IMG_20150812_114116_141_zpse56c1dd7.jpg

IMG_20150812_113941_944_zps144d1b19.jpg
IMG_20150812_114327_628_zpsdfe2339f.jpg

IMG_20150812_114842_747_zps6ba52bb0.jpg

IMG_20150812_114536_272_zpsdf65020e.jpg

Rocker panel trim pieces appear to be there but beat up a bit.

IMG_20150812_114602_360_zpsace37bee.jpg

IMG_20150812_115054_463_zpse7b62e39.jpg
IMG_20150812_115657_076_zps162bd4e3.jpg

IMG_20150812_115713_535_zpsdb940c7e.jpg

IMG_20150812_115909_213_zps2beebca5.jpg

IMG_20150812_114038_487_zps93606260.jpg

IMG_20150812_101718_846_zps938fff6b.jpg

 

Thanks oldspackrat. I forwarded the link to this thread to my old buddy. I will get back to you as soon as I hear from him. Did you get a chance at the crankshaft pulley? Those 4 groove pulleys are pretty hard to come by.

 

Send me your email and I will forward it to my pal Bob Campbell. He is good to go so he will contact you for payment and shipping, He is a good guy and lifelong Olds guy. He has a 54 Hardtop just like my convertible, a 31 coupe and he just bought his 59 98 2 door hardtop. He is in Denver. Thanks for helping out.

Thanks

 

Hey oldspackrat

My old buddy is emailing me and asking about the parts. He is anxious to get them. He is a good guy and is ready to go.

Thanks

 

Glad to hear it! After seeing these cars in the yard & looking up pictures online, I MUST have a '59, coupe, sedan, wagon, whatever!

 

I need your email address so I can send it to him and he can contact you to arrange payment and shipping. Here is a pretty nice 59 here,

http://www.ebay.com/itm/Oldsmobile-N...m=361319906564

 

I'm looking for the LH side 394 exhaust manifold from a dual exhaust '59 Super 88.