H i guys I have a 1971 cutlass- s and I am looking for some info concerning the wire harness which is either three or four pin. My console has a four pin harness but was told that the three pin was the one for the car. I was wondering if the harnesses apply to the varying years or do I have a floor console for another year. Can someone clarify this for me or can I be given documentation to backup the three and four pin harness fitment. Thanks.

 

Sorry, I don't know the answer so I'm bringing it to the top with the hope someone else does. John

 

Thanks John for your concern and I am still conducting my research also hoping that some one might be able to come up with right answer to the question.

 

This is what the console module looks like

 

I am new to this but based on the burl woodgrain shown in your picture it looks like you may have a console out of a 1970. I don't know if they are different in any way, and we also have no way of knowing if the woodgrain insert is original or a replacement. Just a thought.

 

The console feed is a rectangular four terminal connector that's pigtailed out of the dash harness in the general vicinity of the radio. It mates to the connector in the photos. All 1970-72 consoles are the same except for the woodgrain appliqué.

 

You are apsolutely right,it is a rectanguler four pin module. However, the exteension which I have is three pin. Does anyone have one like and what year does it apply to. Thanks.

 

This what my harness extension looks like, it has three pins which came from a 1971 cutlass so I was told. Can anyone varify that or tell me what year olds it fits. On the other hand my console has four pins.