Am looking for front and rear bumpers for my 64 project. Are any other 64 model bumpers interchangable? I found a 64 Jetstar with good bumpers, would these fit?

 

That's a full sized car. You'll need to find A-body stuff, like the Cutlass or Vista Cruiser wagons. That's about it for what will fit.

 

Most GM car lines in the 1960s use one-year-only sheet metal, and almost nothing interchanges across divisions as far as exterior is concerned. Sorry, 1964 Cutlass, F85, or wagon are the only options. Interestingly, the 1964 cars used the same back bumper on coupes, sedans, and wagons.

 

Bummer! Finding a bumper is turning out to be more difficult than I couldve imagined!

 

I may have something, I'll check and see. Front or Rear? Ah, just scrolled up to see both.

 

Sitting right in a salvage yard by me…
They’re still out there. Just start walking yards.
-peter

 

You can buy fiberglass bumpers from several sources.

 

We dont have yards like this in the northeast. Everything rusts to pieces.

 

You’re in Maryland! Just drive a little south!
Being from NY, I do know what you mean.
This is from Old Gold Salvage yard in Dixie Florida. He does sell parts on eBay and he will ship if you want to try and contact him.

-peter

 

64 is a one year bumper. You can run a 65 rear bumper and no one would notice except 64/65 owners. the front bumper would be harder to pull off unless you changed the front clip to a 65. Both years are 1 year but 65 seems to be more available for good cores.

64 rear bumper is the same on 64/65 wagons I believe Buick and Oldsmobile as well, if my memory serves me correctly

 

The rear bumper for the Vista Cruiser station wagon is different from the car. It does not have the cut out for the fuel filler and has a wider v shape in the corners. I made the mistake of buying one many years ago when restoring my 1964 Cutlass.