mitsudave

Just did a front and rear disc conversion on my 69 Cutlass, and before I throw all the hard parts away, thought I'd see if anyone is interested in them. Front spindles, backing plates, hardware etc and rear backing plates and hardware. actually, only one front spindle, the other is no good. Other parts are up for grabs (you pay shipping) if anyone's interested. I'll hang on to them for a couple weeks before I throw them out...

I also have rear lower control arms (not boxed) with 1 year old poly bushings in them.

2blu442

Dave, please post your city and state so us scroungers can get an idea what the shipping costs would be John

mitsudave

Oh, yeah...that might be a good idea! Palm Bay, FL 32907.

I also have the drum brake master cylinder and power booster. They worked fine when removed, no leaks.

redoldsman

Dave, I will take the master cylinder and the two rear drums off your hands if you still have them.

Thanks

mitsudave

They're yours. Do you want the power booster and backing plates, too? The drums have a hardly noticeable ridge, so they should still be serviceable (I didn't mic them). I'll get the stuff packed and weighed, and you can send postage.

Dave

leadftolds

Do you still have the backing plates for the front? I have a 72 olds in need of them. Are they 14 inch? Not sure if a 69 will fit on the 72. Will also take the spindle. Let me know.
Leadftolds
Fairfield, Ca