455 G head flow test
#1
Registered User
Thread Starter
Join Date: Aug 2012
Location: Colorado Springs Colorado/Thousand Oaks Ca
Posts: 1,719
455 G head flow test
Had a chance today to finish my cylinder head test. I started out with a virgin set of small valve G heads. Tested on a 4.155 bore, SF 600 bench @ 28 inches, Brezinski flow adapter. Flow bone stock: .200/122 .300/172 .400/196 .500/209 .550/215 .600/220 .700/226. Same head ported 2.072 valve 45 degree seat: .200/156 .300/210 .400/247 .500/267 .550/270 .600/273 .700/278. Installed a 2.100 valve with a 45 degree seat, more porting, :.200/158 .300/213 .400/251 .500/270 .550/274 .600/275 .700/278 .750/282, @ full lift, retainer hitting the guide flow was 298.5. For now Im done with these heads, but I would like to try some more valves shapes in the future. Picures of the test can be seen on my 455 build thread.
Thread
Thread Starter
Forum
Replies
Last Post
shamusj
Big Blocks
15
March 4th, 2016 06:48 AM