cereal number for the block

Thread Tools
 
Search this Thread
 
Old Aug 11, 2017 | 09:23 AM
  #1  
joseph44's Avatar
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 23
cereal number for the block

Hi Everyone: Question where would I look for the cereal number on a 455 ci don't know if motor is Olds/Pontiac I want to put billet compressor brkts for a/c on. Any help would be greatly appreciated.
Old Aug 11, 2017 | 10:34 AM
  #2  
droptopron's Avatar
delete
 
Joined: Apr 2008
Posts: 2,810
From: Long Island, NY
Originally Posted by joseph44
don't know if motor is Olds/Pontiac

Kinda need to know that.
post a pic. It's easy to tell.
Old Aug 11, 2017 | 01:55 PM
  #3  
jaunty75's Avatar
Registered User
 
Joined: Jun 2009
Posts: 15,194
From: southeastern Michigan
Originally Posted by joseph44
where would I look for the cereal number
I usually look on the bottom of my boxes of Cheerios.

SERIAL number.
Old Aug 11, 2017 | 01:57 PM
  #4  
joe_padavano's Avatar
Old(s) Fart
 
Joined: Mar 2007
Posts: 50,803
From: Northern VA
Didn't like the answer I gave you over on the AACA forum?
Old Aug 11, 2017 | 02:28 PM
  #5  
70-442-W30's Avatar
344879M363895
 
Joined: Jun 2015
Posts: 2,234
From: Raleigh, NC
Originally Posted by joe_padavano
Didn't like the answer I gave you over on the AACA forum?
As I was once told by a friend regarding the W-30, "No good deed goes unpunished." Now be a good boy and eat your serial.
Old Aug 11, 2017 | 04:52 PM
  #6  
cutlassefi's Avatar
Registered User
 
Joined: Nov 2008
Posts: 8,487
From: Central Fl
Originally Posted by jaunty75
I usually look on the bottom of my boxes of Cheerios.

SERIAL number.
X2!! I love it!! You read my mind. Or should I say you red my mind! Lol!
Old Aug 11, 2017 | 05:14 PM
  #7  
RetroRanger's Avatar
72 Olds CS
 
Joined: Jun 2011
Posts: 6,657
from 442.com for an olds 455

Look for the casting number and letter on the horizontal shelf right behind the water pump, just to the [driver's] right of the oil pressure sensor. The casting numbers are usually about ¾" - 1" tall, and the ID/Code is usually a bit larger, a little over an inch, and covered with schmutz. The most common block will be the standard 455: "396021 F" or "396021 Fa". The "a", as in Fa, is actually an upper case A, but about ¼ as big as the F, and subscript to the F
Old Aug 11, 2017 | 06:14 PM
  #8  
joseph44's Avatar
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 23
Thank you RetroRanger for your help I appreciate it. Keep Cruising!
Old Aug 11, 2017 | 06:20 PM
  #9  
joseph44's Avatar
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 23
Originally Posted by joe_padavano
Didn't like the answer I gave you over on the AACA forum?
Sorry Joe I did not see your response I do appreciate your help. Have a great wk/nd Joe and keep cruising!!
Old Aug 12, 2017 | 05:27 PM
  #10  
Kennybill's Avatar
Registered User
 
Joined: Aug 2005
Posts: 1,972
From: Braceville, Ohio
We always say, "gee, we need more people in the hobby" or "why aren't younger people into cars?" Then when a newer member posts a question some jump on the spelling or whatever. When I saw his post I knew what was going to happen. It's like at the Miller Oldsmobile meet, an announcer will say four forty-two. I'll say, "oh boy, he's in big trouble." I've seen guys actually run up the stairs to the PA box and the next thing is their saying how they've been told it's four four two. Getting back to the poster of this thread, I'd say he seems like a polite fellow that joined to gain some knowledge of the older cars. I'm hoping he has an Oldsmobile and he continues using this site to learn about the hobby. Thank you RetroRanger for giving him good advice. To joseph44, welcome to the site and please keep posting because someone will have an answer to your questions.
Old Aug 12, 2017 | 05:52 PM
  #11  
joe_padavano's Avatar
Old(s) Fart
 
Joined: Mar 2007
Posts: 50,803
From: Northern VA
Originally Posted by Kennybill
We always say, "gee, we need more people in the hobby" or "why aren't younger people into cars?" Then when a newer member posts a question some jump on the spelling or whatever.
What you don't realize is that Joseph44 has been a member here since 2014 and a member on the AACA Forum for at least that long. I have answered a number of his questions over the years, primarily at AACA. He previously asked this exact question on the AACA site and I provided a detailed technical answer there (and yes, I also pointed out that he could find the "cereal number" from Kellogs). It was after I spent the time writing that detailed answer that I found the same question here.
Old Aug 12, 2017 | 06:01 PM
  #12  
jaunty75's Avatar
Registered User
 
Joined: Jun 2009
Posts: 15,194
From: southeastern Michigan
Originally Posted by joe_padavano
What you don't realize is that Joseph44 has been a member here since 2014
He would have realized it if he had taken a moment to look over to the left side of Joseph's post, where it says September 2014. While he's over there looking for the date, he might also look his sense of humor, which seems to have been lost.
Old Aug 13, 2017 | 05:39 AM
  #13  
70-442-W30's Avatar
344879M363895
 
Joined: Jun 2015
Posts: 2,234
From: Raleigh, NC
I was just approaching it like everyone was gathered around the table and then the new guy asks a question...nothing wrong with having a little fun. Doesn't make me a bad person. But yes, "four forty-two" would. Some things are meant to be corrected and that's probably one of them. 42 what??? Lugnuts? no... 42 gallons of gas??? no... 42? It's history. Get it right. haha

Actually when you look at the totality of all of the guys who poked a little fun at him and all of the good they have done for everyone here, I think it is a little unfair to get upset to defend someone with around 10 whole posts during his 3 year membership.

This place is really REALLY tame compared to most forums I've seen online. I think there is no problem with joking around every once in a while with either a new or old member. Octania brought that and I miss it. Let everyone have their personality.
Old Aug 13, 2017 | 06:27 AM
  #14  
Bfg's Avatar
Bfg
Registered User
 
Joined: Jan 2012
Posts: 2,288
I think he is coo coo for Cocoa Puffs!
Old Aug 13, 2017 | 07:13 AM
  #15  
Allan R's Avatar
Just an Olds Guy
 
Joined: Jul 2008
Posts: 24,528
From: Edmonton, AB. And "I am Can 'eh' jun - eh"
And here I thought he was looking for the engines VIN derivative, which would be closer to being a serial number than a simple block casting....
Old Aug 25, 2017 | 03:11 PM
  #16  
joseph44's Avatar
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 23
Retro Ranger: This is joseph44 can you tell me if this cereal number 396021f is an Olds motor or Pontiac. Thanks Retro I'd appreciate any help you can give me!!!
Old Aug 25, 2017 | 03:21 PM
  #17  
tru-blue 442's Avatar
Old School Olds
 
Joined: Nov 2008
Posts: 9,272
From: Marble Falls TX
Joseph, that # is for a 455 Olds engine.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jensenracing77
General Discussion
0
Jul 30, 2017 05:47 PM
bspaulding
General Discussion
22
Sep 3, 2016 04:15 PM
Alg
General Questions
7
Jan 1, 2013 05:04 PM
American Lead
Small Blocks
1
Dec 16, 2006 08:46 PM
1BAD68"S"
Small Blocks
8
Sep 17, 2006 06:49 AM




All times are GMT -7. The time now is 08:27 PM.