1969 Cutlass 350 - Power Steering Pump
#1
1969 Cutlass 350 - Power Steering Pump
Hey, all. It may just be me unable to pull myself from my days of maintenance on SBC 350's, but I'm trying to put on a new set of belts on my former-A/C 1969 Olds 350 engine and I genuinely cannot wrap my head around loosening/moving the power steering pump/pulley so I can get the belt onto it. I really need a little bit more detailed instructions than I've been able to find on the web. Can anyone help me out? Much appreciated.
- Jackson
- Jackson
#2
Last edited by tru-blue 442; October 4th, 2023 at 07:40 AM.
#3
Specifically this post in that thread.
https://classicoldsmobile.com/forums...44/#post432836
In the photo below, the three fasteners that you need to loosen are the two bolts behind the pulley (item number 2 in the diagram below) and the one nut on the back of the pump (item number 6).
The blue arrow shows the nut (#6) on the backside of the pump.
https://classicoldsmobile.com/forums...44/#post432836
In the photo below, the three fasteners that you need to loosen are the two bolts behind the pulley (item number 2 in the diagram below) and the one nut on the back of the pump (item number 6).
The blue arrow shows the nut (#6) on the backside of the pump.
Thread
Thread Starter
Forum
Replies
Last Post