When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This was a redo from another builder. Originally it made 495 with ported Gen II Edelbrocks from Champion Race heads, a Torker and 8* less Cam.
I assembled a new short block to go under the same heads but with an Offy Port o Sonic messaged by Peyton Hunt, 8* more cam as mentioned and solid roller lifters on that Hyd roller cam. Same lift as previous cam, .600/.610. Both builds ran the same Dale Cubic 850 carb and the same Dyno headers.
Thanks.
Last edited by cutlassefi; June 30th, 2023 at 03:54 PM.
June 30th, 2023, 03:50 PM
