ratified442

Like title says - need a pass side manifold - must be for a dual exhaust car - not sure it matters but my car has true dual exhaust. Something clean and not cracked/warped! Thank you

2blu442

All Toro's of that vintage had dual exhaust. I've got some manifolds from a 1967 Toronado, I suspect they interchange but am not positive. If you strike out finding one from a 1968 let me know and I'll send you some photos of what I've got. Do you know what letter of castings 1968 had?


John

ratified442

Not sure - when i get home i'll post the manifold casting #. Thank you.

ratified442

My casting # is 395752 - RH

Octania

395752
MANIFOLD, Exhaust Manifold, RH, ID= "G"
1968+ Toronado
1967-72 Toronado, MotorHome, etc. per 72-PNM
PN = CN according to 72-PNM


I have several Toro xmans, but all will have MI pitting and usually a broken off bolt or "wollered out" bolt hole at pipe flange.

deaddds

I will try to check some of my spares but can't remember if duals had a different driver side. 66/7 were duals but 68 were single unless it was the high performance.

2blu442

If deaddds didn't have what you needed let me know. I've got a G manifold with very little pitting.

John

lemoldsnut

I have manifolds off a 68 Toro email me direct lemoldsnut@aol.com