1974 Hurst Olds parts
June 18th, 2014, 07:21 AM
#1
Registered User
Thread Starter
Join Date: Jun 2014
Posts: 5
1974 Hurst Olds parts
I picked up a 1974 Hurst Olds over the weekend with some parts to sell.The body is tough, the swivel buckets are there but need to be recovered. Hood is good but does have the hole for the emblem in the front. I am using the a/c, power windows, power locks and maybe the shift plate for my 442. It runs when gas is put in the carb and no smoke or noise. Trans went right into gear and loaded on the trailer under its own power. Trans is a 350 but the multi bolt for the chev and bop so not sure if it is the right one. engine has #8 head, block cast#39555 8, dip tube#44441150. My #989 600 9541 and I am in Linwood Mi
June 18th, 2014, 08:18 PM
#3
Registered User
Join Date: Nov 2006
Location: McMurray, PA
Posts: 1,781
Based on recent threads, several '74 Hurst/Olds cars are biting the dust soon. Hope someone is grabbing the VINs from these for a future or current registry.
I bought a '72 455/M20 Supreme in Linwood about 10 years ago. I thought it was a pretty nice agricultural area during my drive up there and back.
Terry
I bought a '72 455/M20 Supreme in Linwood about 10 years ago. I thought it was a pretty nice agricultural area during my drive up there and back.
Terry
Last edited by vette442; June 18th, 2014 at 08:20 PM.
June 29th, 2014, 07:15 PM
#6
Registered User
Join Date: Mar 2012
Location: Dallas, Texas
Posts: 486
http://v8cars.hu/73-77cutlassregistry/index.php
December 31st, 2014, 01:04 PM
#10
Registered User
Join Date: Jan 2011
Location: Charlotte Michigan
Posts: 3
I picked up a 1974 Hurst Olds over the weekend with some parts to sell.The body is tough, the swivel buckets are there but need to be recovered. Hood is good but does have the hole for the emblem in the front. I am using the a/c, power windows, power locks and maybe the shift plate for my 442. It runs when gas is put in the carb and no smoke or noise. Trans went right into gear and loaded on the trailer under its own power. Trans is a 350 but the multi bolt for the chev and bop so not sure if it is the right one. engine has #8 head, block cast#39555 8, dip tube#44441150. My #989 600 9541 and I am in Linwood Mi
l have the seats and maybe the seat belts for the front? I would be very interested if so.
December 31st, 2014, 02:11 PM
#12
Registered User
Join Date: Jan 2011
Location: Charlotte Michigan
Posts: 3
December 31st, 2014, 05:00 PM
#13
If you have Facebook , you can look on my wall or mobile uploads and see pictures of base covers . On Facebook search allykatt1992@hotmail.com and my page will come up .
January 1st, 2015, 09:50 AM
#14
Registered User
Join Date: Jan 2011
Location: Charlotte Michigan
Posts: 3
If you have Facebook , you can look on my wall or mobile uploads and see pictures of base covers . On Facebook search allykatt1992@hotmail.com and my page will come up .
Can't seem to get to your page by searching your email. Still interested in the bases though if I can get a look at them.
Thread
Thread Starter
Forum
Replies
Last Post
BeenThere
Parts For Sale
0
September 21st, 2013 07:01 AM
