Parts clean out - MSD, Qjet parts, p/s hoses, bearings, misc
May 31st, 2015, 08:06 PM
#1
Registered User
Thread Starter
Join Date: Jun 2008
Location: Chicago
Posts: 1,394
Parts clean out - Qjet, speaker x-over, misc G-body
Parts clean out resumes, phase 14... prices listed are plus shipping. Edited title and listing to move sold items to the bottom and reduce prices on what's left.
Three things in picture below...
G-body alternator, has a "rebuilt" ink stamp, I used it on my old H/O for a while and it worked fine. Price: $15 PENDING
Nice driver quality G-body door handle, has metallic blue tape insert, chrome has some light scratches but isn't thin or pitted. Price: $5
Brand new Kore3 stainless rear brake line from frame to axle, DOT certified. Price: $25 SOLD!
IMG_9220.jpg
Brand new 600hz bass blockers (speaker crossovers). These prevent over driving small 3.5" speakers so they play more cleanly. Price: $10 PENDING
IMG_9221.jpg
CCC Q-jet rebuild kits... the first one is a Cliff's Performance kit that I bought. I used the high flow needle/seat/float, air horn gasket, and everything else is there. I bought extra air horn gaskets (which are NOT easy to find loose), so there are a few of them there as well as a brand new float. There's a low mileage stock needle/seat/float, and also what I believe is an entire Hygrade brand carb kit. Overall, there's $100 of stuff here new. Price: $30 for everything in picture below. PENDING
IMG_9222.jpg
Claret sail panel inserts for G-body, bought them to use as rechromable cores. Price: $5
IMG_9226.jpg
Borgeson Steering Joint that connects the G-body steering box (or any 800-series box with 30 spline input shaft) to a 3/4 DD shaft. If you also buy this part with a Borgeson 015252 and Borgeson 450024, you'll have the exact same parts Detroit Speed sells you with a markup for their G-body steering shaft kit. I needed a different lower joint on mine, so I removed this joint after literally 5 miles of driving. I painted it black, and it's still in great condition. The new price on this is over $65 + shipping. Price: $20.
Steering1.jpg
Brand new R&M specialties wire looms for Olds, anodized black, part number 1113K. These are bad ***, but I can't use them on my current engine (stock wire routing). I opened it to check it out, all parts are there. New is $90. Price: $65 SOLD!
MSD parts to make your own plug wires. This is a perfect way to route your plug wires the exact way you want to, and they would work great with the wire looms I have listed above. Includes 25 ft of 8.5mm superconductor wire (p/n 34013), a full set of 8 - 90 degree ends for the plugs (p/n 3311), and a set of 6 HEI terminals. They come in packs of two, so you'll need one pack of part number 3320 to complete the kit, they cost $7 for a pair. Also have a pack of pro-clamp wire separators (8843), heat shrink sleeves for cylinder number (3415), and another box of plastic wire looms/separators. If I find the other 2 HEI terminals, I throw them in the collection. If you buy this from summit new, it's $148. Price: $100 SOLD!
New part number 2328 motor mounts, these should work on '69-'72 BBO mounts and all '73-'88 mounts. Price: $10 SOLD!
'68 A/C engine oil fill tube (curved). Price: $5 SOLD!
Pulleys: Pair of them labeled 403, Price $20. SOLD! Sandblasted 'LD' water pump pulley and crank pulley, Price $40. SOLD! These pulleys are nice, not pitted to heck. The sandblasted one is absolutely cherry.
G-body new AC Delco power steering hoses 36-354840 and 36-362190, WITH the bent steel pipe fitting for the return line. Good luck finding the return line pipe new (hence why I bought this), typically that part is boneyard only. Asking $50. SOLD!
NOS GM front wheel bearings for G-body, inners/outers, enough sets for 2 cars. Qty 4 GM 14066918 (Timken LM12748F), Qty 4 GM 457196 (Timken LM67010). Price: $50. Cheap at $6.25/bearing for genuine GM parts. SOLD!
Thanks for looking!
Three things in picture below...
G-body alternator, has a "rebuilt" ink stamp, I used it on my old H/O for a while and it worked fine. Price: $15 PENDING
Nice driver quality G-body door handle, has metallic blue tape insert, chrome has some light scratches but isn't thin or pitted. Price: $5
Brand new Kore3 stainless rear brake line from frame to axle, DOT certified. Price: $25 SOLD!
IMG_9220.jpg
Brand new 600hz bass blockers (speaker crossovers). These prevent over driving small 3.5" speakers so they play more cleanly. Price: $10 PENDING
IMG_9221.jpg
CCC Q-jet rebuild kits... the first one is a Cliff's Performance kit that I bought. I used the high flow needle/seat/float, air horn gasket, and everything else is there. I bought extra air horn gaskets (which are NOT easy to find loose), so there are a few of them there as well as a brand new float. There's a low mileage stock needle/seat/float, and also what I believe is an entire Hygrade brand carb kit. Overall, there's $100 of stuff here new. Price: $30 for everything in picture below. PENDING
IMG_9222.jpg
Claret sail panel inserts for G-body, bought them to use as rechromable cores. Price: $5
IMG_9226.jpg
Borgeson Steering Joint that connects the G-body steering box (or any 800-series box with 30 spline input shaft) to a 3/4 DD shaft. If you also buy this part with a Borgeson 015252 and Borgeson 450024, you'll have the exact same parts Detroit Speed sells you with a markup for their G-body steering shaft kit. I needed a different lower joint on mine, so I removed this joint after literally 5 miles of driving. I painted it black, and it's still in great condition. The new price on this is over $65 + shipping. Price: $20.
Steering1.jpg
Brand new R&M specialties wire looms for Olds, anodized black, part number 1113K. These are bad ***, but I can't use them on my current engine (stock wire routing). I opened it to check it out, all parts are there. New is $90. Price: $65 SOLD!
MSD parts to make your own plug wires. This is a perfect way to route your plug wires the exact way you want to, and they would work great with the wire looms I have listed above. Includes 25 ft of 8.5mm superconductor wire (p/n 34013), a full set of 8 - 90 degree ends for the plugs (p/n 3311), and a set of 6 HEI terminals. They come in packs of two, so you'll need one pack of part number 3320 to complete the kit, they cost $7 for a pair. Also have a pack of pro-clamp wire separators (8843), heat shrink sleeves for cylinder number (3415), and another box of plastic wire looms/separators. If I find the other 2 HEI terminals, I throw them in the collection. If you buy this from summit new, it's $148. Price: $100 SOLD!
New part number 2328 motor mounts, these should work on '69-'72 BBO mounts and all '73-'88 mounts. Price: $10 SOLD!
'68 A/C engine oil fill tube (curved). Price: $5 SOLD!
Pulleys: Pair of them labeled 403, Price $20. SOLD! Sandblasted 'LD' water pump pulley and crank pulley, Price $40. SOLD! These pulleys are nice, not pitted to heck. The sandblasted one is absolutely cherry.
G-body new AC Delco power steering hoses 36-354840 and 36-362190, WITH the bent steel pipe fitting for the return line. Good luck finding the return line pipe new (hence why I bought this), typically that part is boneyard only. Asking $50. SOLD!
NOS GM front wheel bearings for G-body, inners/outers, enough sets for 2 cars. Qty 4 GM 14066918 (Timken LM12748F), Qty 4 GM 457196 (Timken LM67010). Price: $50. Cheap at $6.25/bearing for genuine GM parts. SOLD!
Thanks for looking!
Last edited by 83hurstguy; June 25th, 2015 at 06:21 AM. Reason: Updated ad for sold parts
Thread
Thread Starter
Forum
Replies
Last Post
83hurstguy
Parts For Sale
1
August 17th, 2015 06:05 AM
krooser
Racing and High Performance
30
December 8th, 2013 11:08 PM
f-85
Parts For Sale
1
August 9th, 2013 09:22 AM
oldzy
Drivetrain/Differentials
1
September 14th, 2010 05:40 AM
