Olds 350 and 330. pulleys and brackets.
December 17th, 2010, 03:01 PM
#1
Registered User
Thread Starter
Join Date: Aug 2007
Location: Paw Paw,IL 61353
Posts: 1,507
Olds 350 and 330. pulleys and brackets.
Ok im putting all this stuff in one add. Need the room and the money so its all gotta go!
1967 Olds 330 #4 heads, 394417 block, forged crank, 2bl intake and carb. Newer points, cap, rotor, and wires. Nice valve covers and pan. Looks like its been gone through at some point. Under the valve covers its really clean, it has a aftermarket steel rocker setup (all rockers are tight), and i can tell it has newer style head gaskets. I degreased and pressure washed it. Built a run stand to run it on. Changed the oil, cleaned the plugs, set the timing and dwell. I ran it 4 different times. About a total of 60 min or so. Runs good. Good oil pressure alittle over 50 cold and never went below 47 hot. Smokes alittle when you rev it. but not that bad. (look at video) Starts easy hot or cold. No knocks or ticks. New rubber valve cover gaskets and duplicolor gold paint. Its ready to drop in and go.
Comes complete with carb, aircleaner, starter, 5" W/P, original good dipstick , and stock manifolds . $400 FIRM
Or $480 with original 67 passenger side alternator setup. Pulles, brackets, PS pump.
1972 Olds 350 2bl 7a heads looks all stock and never apart. Needs tune up, carb rebuilt, tstat (its stuck), and a good cleaning and paint. I Put it on my run stand and ran it. (look at video) It seems like a good motor. I only ran it for 10 min or so. The tstat is stuck and shut it off at 215. It has great oil pressure, no knocks or ticks and no smoke. Oil pressure is over 50 and gos up over 70 when you rev it up. I didnt find any leaks. Comes with original 2bl carb, points distributor and coil, water pump, good manifolds, and even good dipstick.
$300 FIRM
or $380 with original 72 passenger side alt setup (pulleys, brackets, and ps pump)
1- KB crank pulley (2 groove) $35 shipped
2- KE W/P pulleys (3 groove) $15 each shipped
1- KC crank pulley (3 groove) $15 shipped
1965 425 pulley set (3 groove) PS 584678, C 587260, WP 584679 $35 shipped
Complete BB 1965 passenger side alt setup. PS pump works good, newer good 5.1" WP, bb only alternator bracket. (had a crack and was welded. It holds up fine though. $100- PLUS shipping.
1967 Olds 330 #4 heads, 394417 block, forged crank, 2bl intake and carb. Newer points, cap, rotor, and wires. Nice valve covers and pan. Looks like its been gone through at some point. Under the valve covers its really clean, it has a aftermarket steel rocker setup (all rockers are tight), and i can tell it has newer style head gaskets. I degreased and pressure washed it. Built a run stand to run it on. Changed the oil, cleaned the plugs, set the timing and dwell. I ran it 4 different times. About a total of 60 min or so. Runs good. Good oil pressure alittle over 50 cold and never went below 47 hot. Smokes alittle when you rev it. but not that bad. (look at video) Starts easy hot or cold. No knocks or ticks. New rubber valve cover gaskets and duplicolor gold paint. Its ready to drop in and go.
Comes complete with carb, aircleaner, starter, 5" W/P, original good dipstick , and stock manifolds . $400 FIRM
Or $480 with original 67 passenger side alternator setup. Pulles, brackets, PS pump.
1972 Olds 350 2bl 7a heads looks all stock and never apart. Needs tune up, carb rebuilt, tstat (its stuck), and a good cleaning and paint. I Put it on my run stand and ran it. (look at video) It seems like a good motor. I only ran it for 10 min or so. The tstat is stuck and shut it off at 215. It has great oil pressure, no knocks or ticks and no smoke. Oil pressure is over 50 and gos up over 70 when you rev it up. I didnt find any leaks. Comes with original 2bl carb, points distributor and coil, water pump, good manifolds, and even good dipstick.
$300 FIRM
or $380 with original 72 passenger side alt setup (pulleys, brackets, and ps pump)
1- KB crank pulley (2 groove) $35 shipped
2- KE W/P pulleys (3 groove) $15 each shipped
1- KC crank pulley (3 groove) $15 shipped
1965 425 pulley set (3 groove) PS 584678, C 587260, WP 584679 $35 shipped
Complete BB 1965 passenger side alt setup. PS pump works good, newer good 5.1" WP, bb only alternator bracket. (had a crack and was welded. It holds up fine though. $100- PLUS shipping.
Thread
Thread Starter
Forum
Replies
Last Post
olddaz
General Questions
0
August 27th, 2014 06:39 PM
