'85 442 G-body brake line to rear dimension?
June 17th, 2014, 09:54 AM
#1
Registered User
Thread Starter
Join Date: Dec 2011
Posts: 7,286
'85 442 G-body brake line to rear dimension?
After fiddling with replacing booster/ master cylinder on the rusty POS '85 442 all day monday, I find that the main brake line to the rear is also rotted away
Looks like 1/4" line
Looks like 48+30+30" would do it.
Only a few more $ to have all the brakes back.
Does anyone have a more accurate figure for the length of this item?
I am probably NOT going to buy a new line from a vendor, nor a roll of tubing and flare my own, the car is just getting cobbled back into operation. Also, with short pcs, I can bend and install into the cavities from frame to differential area more easily.
Thanks
Looks like 1/4" line
Looks like 48+30+30" would do it.
Only a few more $ to have all the brakes back.
Does anyone have a more accurate figure for the length of this item?
I am probably NOT going to buy a new line from a vendor, nor a roll of tubing and flare my own, the car is just getting cobbled back into operation. Also, with short pcs, I can bend and install into the cavities from frame to differential area more easily.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
