Piston's for a 350
June 23rd, 2011, 12:03 PM
#1
Registered User
Thread Starter
Join Date: Oct 2010
Location: Boise ID
Posts: 1,275
Piston's for a 350
I have been looking at pistons for quite a while now and am curious as to whether any one here has used the cast pistons from Supercar Unlimited on Egge's high silicone pistons. The engine I'm building will probably see 5500 RPM's once in a while but will for the most part be used as a street/cruiser car, I'm trying to get between 9.5 and 10.0 compression. I'm not looking for forged pistons, I want quiet and good oil control.
June 23rd, 2011, 06:44 PM
#2
Registered User
Join Date: Mar 2010
Location: South-central Pa.
Posts: 1,309
What # heads are you using?That has alot to do with comp.I used flat tops in mine they weren't that expensive.$200or $300 Comp is almost to high it has to have 93 94 octane.Can't remember the name right know got them from sumitt.I think they only sold one kind.
railguy
railguy
Thread
Thread Starter
Forum
Replies
Last Post
69Rocket350
Parts Wanted
2
February 28th, 2012 07:31 PM
