Oldsmobile Letters

dynamic88 · 04-24-2008, 11:26 AM

does anyone have any idea if there is a company out there. That a person can buy the oldsmobile letters for the trunk and hood for 65 olds dynamic 88. I have checked usa parts, year one. they dont have them for the big body olds. short of ebay for a used set. I dont know where else to check. unless someone here has a decent set they want to part with. thanks chris

Olds64 · 04-24-2008, 03:07 PM

Did you try Kanter and Fusicks?

dynamic88 · 04-25-2008, 11:45 AM

yes no one carries them anymore. does not sound like they are even made for that year anymore. i guess either fill in the holes before i paint it or watch ebay for a decent set.

Mister · 04-25-2008, 03:56 PM

If you're in a pinch, the 1964 letters look an awful lot like the 1965 ones, and USA Parts Supply does have those. Part S12.182AK

Just based on browsing pictures on eBay, I think you could mix and match the letters from the two years, and unless you get two different versions of "O" in the same word, noone will know the difference.

Just my two cents.

mikeraines63 · 04-25-2008, 08:07 PM

Thats what I'd say too Mister. Just use the 64 letters unless it's a POINTS getter. I'm betting the normal car show crowd will never notice. And if some one does justsay it's your own CUSTOM touch. You can always change them out if you ever come across a set for a 65.

That makes 4 cents

dynamic88 · 04-26-2008, 04:13 AM

im not concerned about the points. i just wanted a nice set for on it. i will check with usa parts again, but i thought they told me they did not have any letters left for the 60's versions. i hope im wrong. i dont know if the 64 letters will fit in the exact holes for the pins on a 65, but could always fill them in and redrill for new letters. that could be fun

thanks guys i will check into that later today. chris

dynamic88 · 04-26-2008, 02:53 PM

MISTER, I CHECKED WITH USA PARTS ON THOSE LETTERS WITH THE PART NUMBER YOU GAVE ME. THEY DO NOT HAVE THEM. THEY DO NOT HAVE ANY OF THE BIG BODY LETTERS FOR THE 1960'S CARS. THEY SAID IT WOULD BE AT LEAST A YEAR BEFORE THEY GET ANY. THE TOOL MAKER THAT USE TO MAKE THEM QUIT. HE DID SET ME UP WITH A SET OF 65 LETTERS THAT FIT A CUTLASS. THEY ARE ABOUT 1/4 INCH SHORTER THAN THE ORIGINALS. I WILL HAVE TO REDRILL THE PIN HOLES PROBABLY, BUT THAT WAS THE BEST I COULD DO. THEY SHOULD BE HERE NEXT WEEK. THANKS FOR THE HELP. CHRIS

Run to Rund · 04-26-2008, 07:06 PM

I have some misc. letters probably from 50s and early 60s. If you post a photo I can try to match something up to it.

dynamic88 · 04-27-2008, 07:09 AM

run to rund, thanks for the offer. i bought all new sets. they should be in this next week. i wanted all new for my restro job. the ones i originally had are in pretty bad shape. so if i mixed and matched with what you have. mine would still look like crap for my new paint job. so thanks anyway. chris

Mister · 04-27-2008, 06:05 PM

Quote:

Originally Posted by dynamic88

MISTER, I CHECKED WITH USA PARTS ON THOSE LETTERS WITH THE PART NUMBER YOU GAVE ME. THEY DO NOT HAVE THEM. THEY DO NOT HAVE ANY OF THE BIG BODY LETTERS FOR THE 1960'S CARS. THEY SAID IT WOULD BE AT LEAST A YEAR BEFORE THEY GET ANY. THE TOOL MAKER THAT USE TO MAKE THEM QUIT. HE DID SET ME UP WITH A SET OF 65 LETTERS THAT FIT A CUTLASS. THEY ARE ABOUT 1/4 INCH SHORTER THAN THE ORIGINALS. I WILL HAVE TO REDRILL THE PIN HOLES PROBABLY, BUT THAT WAS THE BEST I COULD DO. THEY SHOULD BE HERE NEXT WEEK. THANKS FOR THE HELP. CHRIS

Well... shoot.

The part number was from their 2005 catalog, so there was always a chance that it had left the market after 3 years. Still, it's rather scary that a set of reproduction parts like that can be so dependent on the whims of one guy (or gal).

FWIW, the 1965 Starfire had the same trunk, but did not have the lettering on the back. So leaving the decals off would not be entirely unprecedented.

I wish you the best of luck with whatever you decide to do.

dynamic88 · 04-27-2008, 06:19 PM

thanks, i thought about filling in the holes and not putting the letters back on, but the guy was able to set me up with a set for a cutlass. so im going to just redrill the holes and use those. see ya chris

dynamic88 · 04-30-2008, 06:18 PM

i got my letters today from usa parts. the trunk letters surprisingly all fit in the same pin holes except the "L". will have to redrill those. i messed up when i prdered. i got two sets of trunk instead of one truck and one hood. the hood ones will have to be redrilled, but should look pretty good when done. the letters are for a 65 cutlass.

Mister · 04-30-2008, 06:25 PM

Quote:

Originally Posted by dynamic88

i got my letters today from usa parts. the trunk letters surprisingly all fit in the same pin holes except the "L". will have to redrill those. i messed up when i prdered. i got two sets of trunk instead of one truck and one hood. the hood ones will have to be redrilled, but should look pretty good when done. the letters are for a 65 cutlass.

Sweeeeeet (as they say nowadays). I would like to see some before/after pictures once it's all done.

04-24-2008, 11:26 AM	#1 (permalink)
dynamic88 Senior Member Join Date: Oct 2006 Posts: 138	Oldsmobile Letters does anyone have any idea if there is a company out there. That a person can buy the oldsmobile letters for the trunk and hood for 65 olds dynamic 88. I have checked usa parts, year one. they dont have them for the big body olds. short of ebay for a used set. I dont know where else to check. unless someone here has a decent set they want to part with. thanks chris

04-24-2008, 03:07 PM	#2 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,088	Did you try Kanter and Fusicks? __________________ "Some men are Baptists, others Catholics. My father was an OLDSMOBILE man." Ralphie Billingsley A Christmas Story 1983 "We rei-eign, supreme, ooooh god! Burrito supreme, and a chicken supreme, and a CUTLASS SUPREME!" Tenacious D 2007

04-25-2008, 03:56 PM	#4 (permalink)
Mister Member Join Date: Mar 2007 Location: Omaha, NE Posts: 51	Acceptable substitute If you're in a pinch, the 1964 letters look an awful lot like the 1965 ones, and USA Parts Supply does have those. Part S12.182AK Just based on browsing pictures on eBay, I think you could mix and match the letters from the two years, and unless you get two different versions of "O" in the same word, noone will know the difference. Just my two cents.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Numbers and Letters	Southern_Hospitality	ClassicOldsmobile General Discussion	5	02-28-2008 03:36 PM
Which letters/numbers represent which rear end ratios ?	thomaswatk	Cutlass	2	03-22-2007 01:31 PM
Wheels, grille & letters	Chumley	Cutlass	2	10-25-2006 07:24 PM

04-25-2008, 11:45 AM	#3 (permalink)
dynamic88 Senior Member Join Date: Oct 2006 Posts: 138	yes no one carries them anymore. does not sound like they are even made for that year anymore. i guess either fill in the holes before i paint it or watch ebay for a decent set.

04-25-2008, 08:07 PM	#5 (permalink)
mikeraines63 64 Dynamic 88 Join Date: Feb 2008 Location: Ada, Ohio Posts: 7	Thats what I'd say too Mister. Just use the 64 letters unless it's a POINTS getter. I'm betting the normal car show crowd will never notice. And if some one does justsay it's your own CUSTOM touch. You can always change them out if you ever come across a set for a 65. That makes 4 cents

04-26-2008, 04:13 AM	#6 (permalink)
dynamic88 Senior Member Join Date: Oct 2006 Posts: 138	im not concerned about the points. i just wanted a nice set for on it. i will check with usa parts again, but i thought they told me they did not have any letters left for the 60's versions. i hope im wrong. i dont know if the 64 letters will fit in the exact holes for the pins on a 65, but could always fill them in and redrill for new letters. that could be fun thanks guys i will check into that later today. chris

04-26-2008, 02:53 PM	#7 (permalink)
dynamic88 Senior Member Join Date: Oct 2006 Posts: 138	MISTER, I CHECKED WITH USA PARTS ON THOSE LETTERS WITH THE PART NUMBER YOU GAVE ME. THEY DO NOT HAVE THEM. THEY DO NOT HAVE ANY OF THE BIG BODY LETTERS FOR THE 1960'S CARS. THEY SAID IT WOULD BE AT LEAST A YEAR BEFORE THEY GET ANY. THE TOOL MAKER THAT USE TO MAKE THEM QUIT. HE DID SET ME UP WITH A SET OF 65 LETTERS THAT FIT A CUTLASS. THEY ARE ABOUT 1/4 INCH SHORTER THAN THE ORIGINALS. I WILL HAVE TO REDRILL THE PIN HOLES PROBABLY, BUT THAT WAS THE BEST I COULD DO. THEY SHOULD BE HERE NEXT WEEK. THANKS FOR THE HELP. CHRIS

04-26-2008, 07:06 PM	#8 (permalink)
Run to Rund Senior Member Join Date: Mar 2008 Posts: 80	I have some misc. letters probably from 50s and early 60s. If you post a photo I can try to match something up to it.

04-27-2008, 07:09 AM	#9 (permalink)
dynamic88 Senior Member Join Date: Oct 2006 Posts: 138	run to rund, thanks for the offer. i bought all new sets. they should be in this next week. i wanted all new for my restro job. the ones i originally had are in pretty bad shape. so if i mixed and matched with what you have. mine would still look like crap for my new paint job. so thanks anyway. chris

04-27-2008, 06:19 PM	#11 (permalink)
dynamic88 Senior Member Join Date: Oct 2006 Posts: 138	thanks, i thought about filling in the holes and not putting the letters back on, but the guy was able to set me up with a set for a cutlass. so im going to just redrill the holes and use those. see ya chris

04-30-2008, 06:18 PM	#12 (permalink)
dynamic88 Senior Member Join Date: Oct 2006 Posts: 138	i got my letters today from usa parts. the trunk letters surprisingly all fit in the same pin holes except the "L". will have to redrill those. i messed up when i prdered. i got two sets of trunk instead of one truck and one hood. the hood ones will have to be redrilled, but should look pretty good when done. the letters are for a 65 cutlass.